haven't made a build thread on here yet.. figured id better make one eventually
here's my prelude when I got it... 1989 Honda Prelude barbados yellow (Y49) 2.0si
with entirely mechanical 4WS
160k bone stock expect shitty speakers/ headunit and a full thermal R&D exhaust. it will be 2 years ago in may that i got the car.
but my love obsession for these old preludes has been an ongoing thing... the car i got my first ride home in from the hospital and the car of my childhood was my dads red 1986 honda prelude si 5spd. dubbed "the red car" i couldnt have imagined my childhood without it
eventually got some enkeis I liked
then got some axis og sans and lowered the car a little with some other suspension goodies
then went with some borbet type a - 16x7.5
4ws
engine bay went from this
to this
then my prelude started overheating and other little things.. like rust. so I pulled it off the road.
rust cut out
for flares
spoiler, all 3 rear badges, antenna, and front badge all welded and filled
a good friend helped me take apart and clean my bottom end
fresh paint
the width
interior shot
coils on
motor to be put together soon.. weisco pistons, h23 shot peened rods, king Motorsport main bearings, ACL rod bearings, new OEM thrust washers, crank polished and inspected. The bottom end is built for boost, the whole top end is rebuilt but essentially stock.
and just me and the Lude..
new wheels have been ordered to compliment the new wider body..
17x9 et +15, 17x9.5 et-10
thanks for viewing
here's my prelude when I got it... 1989 Honda Prelude barbados yellow (Y49) 2.0si
with entirely mechanical 4WS
160k bone stock expect shitty speakers/ headunit and a full thermal R&D exhaust. it will be 2 years ago in may that i got the car.
but my love obsession for these old preludes has been an ongoing thing... the car i got my first ride home in from the hospital and the car of my childhood was my dads red 1986 honda prelude si 5spd. dubbed "the red car" i couldnt have imagined my childhood without it
eventually got some enkeis I liked
then got some axis og sans and lowered the car a little with some other suspension goodies
then went with some borbet type a - 16x7.5
4ws
engine bay went from this
to this
then my prelude started overheating and other little things.. like rust. so I pulled it off the road.
rust cut out
for flares
spoiler, all 3 rear badges, antenna, and front badge all welded and filled
a good friend helped me take apart and clean my bottom end
fresh paint
the width
interior shot
coils on
motor to be put together soon.. weisco pistons, h23 shot peened rods, king Motorsport main bearings, ACL rod bearings, new OEM thrust washers, crank polished and inspected. The bottom end is built for boost, the whole top end is rebuilt but essentially stock.
and just me and the Lude..
new wheels have been ordered to compliment the new wider body..
17x9 et +15, 17x9.5 et-10
thanks for viewing
Comment