 |
06-02-2009, 07:25 PM
|
#1
|
|
StanceWorks Visitor
- Join Date: May 2009
- Location: Murfreesboro
- Posts: 88
- User Status:
Offline
- Contact this user:
|
I'm pretty stoked
So I am pretty excited so I thought I'd make a thread about it and seeing as it is about wheels this seemed to be the appropriate place. I just received and e-mail from a guy off a Corvette forum and he has a set of 17x8.5 and 17x9.5 Sawblades he will let go for 50 bucks + shipping. You better believe I am taking this deal! I should have some sawblades in a few weeks then I've gotta polish the shit out of them, get adapters and tires.
He sent me pictures of the fronts, which he said had a bit of clear coat peeling. I can get pictures of the rears on request.
__________________
Neuspeed Supercharged 2.0L MkIV Jetta
2.4 inch pulley | C2 #42 tune | Bosch 440cc injectors | Vr6 MAF | Snow Performance Stg 1 water/meth | Autotech 260 cam | GLI exhaust | CAI | Vr6 clutch/g60 14lb flywheel | Stg 1 polyurethane dogbone motor mount
Last edited by supercharge2go; 06-02-2009 at 07:30 PM.
|
|
|
|
|
06-02-2009, 08:04 PM
|
#2
|
|
StanceWorks Member
StanceWorks OG
- Join Date: Mar 2009
- Location: Nashvegas, TN
- Posts: 4,067
- User Status:
Offline
- Contact this user:
|
Shelley,
I hope you die.
Mike
|
|
|
|
|
06-02-2009, 08:05 PM
|
#3
|
|
StanceWorks Visitor
- Join Date: May 2009
- Posts: 142
- User Status:
Offline
|
wayyy overpriced
Its going to be sick
|
|
|
|
|
06-02-2009, 08:07 PM
|
#4
|
|
StanceWorks Visitor
- Join Date: May 2009
- Location: Murfreesboro
- Posts: 88
- User Status:
Offline
- Contact this user:
|
Other people had wanted anywhere from 200-500 dollars just for the wheels alone without tires or adapters. I knew if I waited a good deal would come along. And Mike, you have like 3 or 4 sets of RS's so you shut up 
__________________
Neuspeed Supercharged 2.0L MkIV Jetta
2.4 inch pulley | C2 #42 tune | Bosch 440cc injectors | Vr6 MAF | Snow Performance Stg 1 water/meth | Autotech 260 cam | GLI exhaust | CAI | Vr6 clutch/g60 14lb flywheel | Stg 1 polyurethane dogbone motor mount
|
|
|
|
|
06-02-2009, 08:09 PM
|
#5
|
|
StanceWorks Visitor
- Join Date: May 2009
- Posts: 142
- User Status:
Offline
|
Thats incredible though are you picking them up or having them shipped?
|
|
|
|
|
06-02-2009, 08:11 PM
|
#6
|
|
StanceWorks Member
StanceWorks OG
- Join Date: Apr 2009
- Location: The Bay, Cali
- Posts: 12,807
- User Status:
Offline
- Contact this user:
|
I picked mine up for $340...
|
|
|
|
|
06-02-2009, 08:41 PM
|
#7
|
|
StanceWorks Visitor
- Join Date: May 2009
- Location: Murfreesboro
- Posts: 88
- User Status:
Offline
- Contact this user:
|
He is going to ship them to me. I need to ask him where he is located. Maybe I will luck out and he will be close. I imagine after shipping and all it will be a just a little over 100 dollars for the wheels. Then I have to start saving for tires and adapters. I'm gonna run either 33mm or 35mm with a 205/45 up front and a 215/45 on the rear. This guy on the tex is running those tires with a 35mm adapter. I can't decide if it's took much poke or just right.
__________________
Neuspeed Supercharged 2.0L MkIV Jetta
2.4 inch pulley | C2 #42 tune | Bosch 440cc injectors | Vr6 MAF | Snow Performance Stg 1 water/meth | Autotech 260 cam | GLI exhaust | CAI | Vr6 clutch/g60 14lb flywheel | Stg 1 polyurethane dogbone motor mount
|
|
|
|
|
06-02-2009, 09:00 PM
|
#8
|
|
StanceWorks Member
StanceWorks OG
- Join Date: Mar 2009
- Location: Nashvegas, TN
- Posts: 4,067
- User Status:
Offline
- Contact this user:
|
Just right, assuming you go just a little lower than him.
|
|
|
|
|
06-02-2009, 09:01 PM
|
#9
|
|
StanceWorks Visitor
- Join Date: May 2009
- Location: Murfreesboro
- Posts: 88
- User Status:
Offline
- Contact this user:
|
I should be able to. I'm not against taking helper springs and shit like that out to get low.
__________________
Neuspeed Supercharged 2.0L MkIV Jetta
2.4 inch pulley | C2 #42 tune | Bosch 440cc injectors | Vr6 MAF | Snow Performance Stg 1 water/meth | Autotech 260 cam | GLI exhaust | CAI | Vr6 clutch/g60 14lb flywheel | Stg 1 polyurethane dogbone motor mount
|
|
|
|
|
06-02-2009, 10:10 PM
|
#10
|
|
StanceWorks Addicted
- Join Date: May 2009
- Location: Way East
- Posts: 955
- User Status:
Offline
|
Hell yeah, no compromises. What coils do you have?
__________________
|
|
|
|
|
06-02-2009, 10:55 PM
|
#11
|
|
StanceWorks Visitor
- Join Date: May 2009
- Location: Murfreesboro
- Posts: 88
- User Status:
Offline
- Contact this user:
|
JOM coil overs. Yes I know they aren't some big name brand but they go low and the ride is not bad at all. Plus, I got them for 500 shipped to my door and installed them myself!
__________________
Neuspeed Supercharged 2.0L MkIV Jetta
2.4 inch pulley | C2 #42 tune | Bosch 440cc injectors | Vr6 MAF | Snow Performance Stg 1 water/meth | Autotech 260 cam | GLI exhaust | CAI | Vr6 clutch/g60 14lb flywheel | Stg 1 polyurethane dogbone motor mount
|
|
|
|
|
06-02-2009, 11:17 PM
|
#12
|
|
StanceWorks Regular
- Join Date: May 2009
- Location: Elitist Viejo, CA
- Posts: 493
- User Status:
Offline
|
wow, never would have thought about putting vette wheels on a vw. love the look!
__________________
|
|
|
|
|
06-03-2009, 05:27 AM
|
#13
|
|
StanceWorks Addicted
- Join Date: May 2009
- Location: Way East
- Posts: 955
- User Status:
Offline
|
Quote:
Originally Posted by supercharge2go
JOM coil overs. Yes I know they aren't some big name brand but they go low and the ride is not bad at all. Plus, I got them for 500 shipped to my door and installed them myself!
|
Not bad at all, I know a kid who ran them on his Mk3 2.0. Nice ride, and, yeah, they do go low.
__________________
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -5. The time now is 08:38 PM.
|
