Announcement

Collapse
No announcement yet.

I bit off more than I can chew: An E28 Build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I bit off more than I can chew: An E28 Build

    Hey Guys, so 3 weeks ago I picked up my dream car, an '83 528e! I was looking for a project and I found one, but due to current living situations I can only work on the car on the weekend, so let's just say this now: This will be a very slow build progression, sorry.


    So to start, I picked up the car dirt cheap, for what it was, it came with 17in ASA Revolutions (meh) and a sick paint job done in bed liner. Anyways, there is little to no rust, except in the rear quarters. Car was a little rough running but replaced a hose that the PO just taped up helps it start and run a little stronger. Still have a generic Cold Start issue that I'm currently trying to fix. Pics aren't great, but I will be updating any chance I get.

    First things first (aesthetically) was a bumper tuck, since I can't find a pair of cheap euros yet..


    Following the bumper tuck, I pieced together a better shifter using my buddy's old Geo metro parts, the car didn't come with a boot or housing, so i worked with what I had.


    Side shot to show off the wheels / wonderful paint job....


    Along the way i did a few things like repainting the grills, polishing the kidneys, pulling some dents, etc. Up next I'm planning on redoing the carpet with some black interior carpet, and looking for a new uncracked dash or a plastic dash cover.

    As of right now, my priorities are to fix the cold start and get it running strong (it only has 98k, it's not bad at all.)

    Happy to be at S/W hoping to learn a ton, thanks guys!
    Originally posted by projectmaxspeed
    well i want to be different i could go for some vette saw blades


    That destructo-ray is a played out gag, in the cape
    and the pants suit lookin' like a straight out...Dag.

  • #2
    not a bad place to start with! keep it up and you will have a rad e28 on your hands
    West Coast Gentlemen
    IG: itsjakedassit30 / westcoastgentlemen

    Comment


    • #3
      I want one of these so bad, good luck with the build.. Looks to be a solid car.
      sigpic
      E39 M5 | Jet Black | S62 | 6MT
      instagram: @adrienbroome

      Comment


      • #4
        Well just ordered a whole new vacuum / silicone hose kit, a new head gasket, and new spark plugs, wires, and fuel rail.

        Hopefully these can fix it's rough idle
        Originally posted by projectmaxspeed
        well i want to be different i could go for some vette saw blades


        That destructo-ray is a played out gag, in the cape
        and the pants suit lookin' like a straight out...Dag.

        Comment


        • #5
          What color do you plan on painting it?
          [CENTER][url=http://www.stanceworks.com/forums/showthread.php?t=66924][color=red]e28 build thread[/color] [/url]
          [img]http://i.imgur.com/hNTlNvf.jpg?2[/img]
          Instagram: [url=https://instagram.com/divingboardlord/][color=red]@divingboardlord[/color][/url][/CENTER]

          Comment


          • #6
            Currently tossing it up between white, or a dark burgundy, like a dirty red.

            I'm painting myself so I wanna do white because there is less chance of a mistake, but at the same time, I don;'t know if I'd be happy with white.
            Originally posted by projectmaxspeed
            well i want to be different i could go for some vette saw blades


            That destructo-ray is a played out gag, in the cape
            and the pants suit lookin' like a straight out...Dag.

            Comment


            • #7
              ayyy man, I can't wait to see where this goes, not a bad start too

              '08 335i

              Comment


              • #8
                Originally posted by Hellalime View Post
                ayyy man, I can't wait to see where this goes, not a bad start too
                You and me both man! My goal is by next year to be lowered/mod slammed on some Borbet Type As, fully painted, possibly rear cage, and I deff wanna have a euro valance kit before that as well.

                Currently trying to swap my ASA Rev's for some Porsche Phone Dials, but not sure how well that's going to pan out.
                Originally posted by projectmaxspeed
                well i want to be different i could go for some vette saw blades


                That destructo-ray is a played out gag, in the cape
                and the pants suit lookin' like a straight out...Dag.

                Comment


                • #9
                  Saw this thing floating around cl for awhile. Glad someone is going to save it. If you get those dials and adapters I have some 17" 5x130 type A's il be listing soon.
                  Follow on IG
                  amgwheelwhore

                  Buy my wheels
                  Vintage AME Wheels
                  RUF Speedline Wheels

                  Buy my cars
                  W115 & W123

                  Comment


                  • #10
                    Originally posted by Expire View Post
                    Currently tossing it up between white, or a dark burgundy, like a dirty red.

                    I'm painting myself so I wanna do white because there is less chance of a mistake, but at the same time, I don;'t know if I'd be happy with white.
                    At first, i honestly ***** my car being white, but it has started to grow on me. I would still prefer it to be black but who wouldn't
                    [CENTER][url=http://www.stanceworks.com/forums/showthread.php?t=66924][color=red]e28 build thread[/color] [/url]
                    [img]http://i.imgur.com/hNTlNvf.jpg?2[/img]
                    Instagram: [url=https://instagram.com/divingboardlord/][color=red]@divingboardlord[/color][/url][/CENTER]

                    Comment


                    • #11
                      Originally posted by Robitussin View Post
                      At first, i honestly ***** my car being white, but it has started to grow on me. I would still prefer it to be black but who wouldn't
                      I already have a blacked out car, so I've gotten a little sick of black/black, as well, I want something a little more classier, kind of 'royal'. I have a bunch of Montana HC paint cans of "Morocco gold" that I plan to paint the engine bay with, and use a sprayer on the body. Something about Burgundy, Black, and Gold it's just love.


                      Since it was mentioned, here is my murdered 4g:
                      Originally posted by projectmaxspeed
                      well i want to be different i could go for some vette saw blades


                      That destructo-ray is a played out gag, in the cape
                      and the pants suit lookin' like a straight out...Dag.

                      Comment


                      • #12
                        Originally posted by Expire View Post
                        I already have a blacked out car, so I've gotten a little sick of black/black, as well, I want something a little more classier, kind of 'royal'. I have a bunch of Montana HC paint cans of "Morocco gold" that I plan to paint the engine bay with, and use a sprayer on the body. Something about Burgundy, Black, and Gold it's just love.


                        Since it was mentioned, here is my murdered 4g:
                        Class is the way to go with e28s imo. As for burgundy, i think calypso red would be nice, considering it is a BMW color and i don't believe it was an option for e28s, it would be cool to see an e28 in that color.
                        [CENTER][url=http://www.stanceworks.com/forums/showthread.php?t=66924][color=red]e28 build thread[/color] [/url]
                        [img]http://i.imgur.com/hNTlNvf.jpg?2[/img]
                        Instagram: [url=https://instagram.com/divingboardlord/][color=red]@divingboardlord[/color][/url][/CENTER]

                        Comment


                        • #13
                          Originally posted by Robitussin View Post
                          Class is the way to go with e28s imo. As for burgundy, i think calypso red would be nice, considering it is a BMW color and i don't believe it was an option for e28s, it would be cool to see an e28 in that color.
                          I'm actually shooting for a darker version of the z4's Merlot Red, I was also entertaining the idea of Volvo's Java Metallic, that gold and chrome would look really nice.
                          Originally posted by projectmaxspeed
                          well i want to be different i could go for some vette saw blades


                          That destructo-ray is a played out gag, in the cape
                          and the pants suit lookin' like a straight out...Dag.

                          Comment


                          • #14
                            Originally posted by Expire View Post
                            I'm actually shooting for a darker version of the z4's Merlot Red, I was also entertaining the idea of Volvo's Java Metallic, that gold and chrome would look really nice.
                            Yeah merlot red is pretty nice. Never heard of it before but i just looked it up.
                            [CENTER][url=http://www.stanceworks.com/forums/showthread.php?t=66924][color=red]e28 build thread[/color] [/url]
                            [img]http://i.imgur.com/hNTlNvf.jpg?2[/img]
                            Instagram: [url=https://instagram.com/divingboardlord/][color=red]@divingboardlord[/color][/url][/CENTER]

                            Comment


                            • #15
                              Originally posted by Robitussin View Post
                              Yeah merlot red is pretty nice. Never heard of it before but i just looked it up.
                              I'll most likely call up a buddy and let him mix me something special, like a burgundy with some purples and browns and a plum pearlescent, probably would make a nice dark burgundy.
                              Originally posted by projectmaxspeed
                              well i want to be different i could go for some vette saw blades


                              That destructo-ray is a played out gag, in the cape
                              and the pants suit lookin' like a straight out...Dag.

                              Comment

                              Working...
                              X