Hi there, decided to sell my second set of 18" Futuras.
PCD: 5x120 and 5x112
width: well i have 2x2" lips, 2x3" lips and 2x3.5" lips along with 2x6.5" barrels, 2x7.0" barrels and 2x8.5" barrels so i can make a set by request.
(one of the 7.0" barrels had a small crack and it has been professionally welded - refer to the last pic)
Two of the faces are with 11mm thicker hubs (i will call them A) than the other two (B)
So here are the scenarios:
all the pats again:
2xA faces, 2xB faces
2x6.5" barrels, 2x7" barrels, 2x8.5" barrels
2x2" lips, 2x3" lips, 2x3.5" lips
2.0" lip + 0.5" face + 6.5" barrel = 9.0j, offset will be: ~et29 with A faces or ~et40 with B faces
2.0" lip + 0.5" face + 7.0" barrel = 9.5j, offset will be: ~et35 with A faces or ~et46 with B faces
2.0" lip + 0.5" face + 8.5" barrel = 11.0j, offset will be: ~et53 with A faces or ~et64 with B faces
3.0" lip + 0.5" face + 6.5" barrel = 10.0j, offset will be: ~et17 with A faces or ~et28 with B faces
3.0" lip + 0.5" face + 7.0" barrel = 10.5j, offset will be: ~et23 with A faces or ~et34 with B faces
3.0" lip + 0.5" face + 8.5" barrel = 12.0j, offset will be: ~et41 with A faces or ~et52 with B faces
3.5" lip + 0.5" face + 6.5" barrel = 10.5j, offset will be: ~et11 with A faces or ~et22 with B faces
3.5" lip + 0.5" face + 7.0" barrel = 11.0j, offset will be: ~et17 with A faces or ~et28 with B faces
3.5" lip + 0.5" face + 8.5" barrel = 12.5j, offset will be: ~et35 with A faces or ~et46 with B faces
Price: $3000 shipped with mirror polished lips, powdercoated faces, caps and barrels
Picture of the welded 7.0" barrel
PCD: 5x120 and 5x112
width: well i have 2x2" lips, 2x3" lips and 2x3.5" lips along with 2x6.5" barrels, 2x7.0" barrels and 2x8.5" barrels so i can make a set by request.
(one of the 7.0" barrels had a small crack and it has been professionally welded - refer to the last pic)
Two of the faces are with 11mm thicker hubs (i will call them A) than the other two (B)
So here are the scenarios:
all the pats again:
2xA faces, 2xB faces
2x6.5" barrels, 2x7" barrels, 2x8.5" barrels
2x2" lips, 2x3" lips, 2x3.5" lips
2.0" lip + 0.5" face + 6.5" barrel = 9.0j, offset will be: ~et29 with A faces or ~et40 with B faces
2.0" lip + 0.5" face + 7.0" barrel = 9.5j, offset will be: ~et35 with A faces or ~et46 with B faces
2.0" lip + 0.5" face + 8.5" barrel = 11.0j, offset will be: ~et53 with A faces or ~et64 with B faces
3.0" lip + 0.5" face + 6.5" barrel = 10.0j, offset will be: ~et17 with A faces or ~et28 with B faces
3.0" lip + 0.5" face + 7.0" barrel = 10.5j, offset will be: ~et23 with A faces or ~et34 with B faces
3.0" lip + 0.5" face + 8.5" barrel = 12.0j, offset will be: ~et41 with A faces or ~et52 with B faces
3.5" lip + 0.5" face + 6.5" barrel = 10.5j, offset will be: ~et11 with A faces or ~et22 with B faces
3.5" lip + 0.5" face + 7.0" barrel = 11.0j, offset will be: ~et17 with A faces or ~et28 with B faces
3.5" lip + 0.5" face + 8.5" barrel = 12.5j, offset will be: ~et35 with A faces or ~et46 with B faces
Price: $3000 shipped with mirror polished lips, powdercoated faces, caps and barrels
Picture of the welded 7.0" barrel
Comment