SOLD FOR ASKING PRICE!!!!!!
well yeah its time for the new wheels but first got to sell the current wheels
WHEELS WILL BE OFF THE CAR THE DAY AFTER SOWO (MAY 19th)
Price- new price $3650! why? well because after everything these were just around $5,000 and countless trips back and forth and s h i t load of polishing!
Location- 08234, NJ bring cash! NO TRADES! I got beer!
Shipping! buyer pays for shipping! iv shipped wheels all over the states yes they will be packed 100% secure along with tracking and insurance!
SPECS
Originally bbs rs model 321 17x9 et40
they were reinserted to 5x120 back pads were machined to gain more offset and center bore is 72.56mm to be exact not a mm off! nice and tight! like you know what
Centers were powder coated by tom over at espo-powdercoating
Original BBS hardware fully polished
Inner Barrels are mirror polished as well
Half Hex caps full polished
BBS logos full polished
BBS Valve stems
REARS- 18x11.5 et21 3.5 inch lips wrapped in 245/40/18 falken 912s 95% no camber wear
FRONTS- 18x10 et21 3 inch lips wrapped in 225/40/18 falken 912s 95% no camber wear
Condition- 9.5/10
OMG THEY FIT? yes no s h i t they fit! I didnt mess with my front at all didnt cut anything didnt roll didnt remove inner plastics! front camber is set at -4.2 degrees , rear slightly cut and rolled (not pulled) -3.9/-4 degrees of camber no rubbing front and rear!
pics! yes finally this guy stfu and put up some pics!
13370420304_bccb0dc753_b by vivala3nicky, on Flickr
securedownload by vivala3nicky, on Flickr
securedownload (2) by vivala3nicky, on Flickr
securedownload (3) by vivala3nicky, on Flickr
13366978964_6d3554693b_b by vivala3nicky, on Flickr
securedownload (1) by vivala3nicky, on Flickr
13366977694_9ecde7a90a_b by vivala3nicky, on Flickr
13366965144_205ac4ffb3_b by vivala3nicky, on Flickr
13366742743_ab15ba5065_b by vivala3nicky, on Flickr
13366736653_62de13ce4b_b by vivala3nicky, on Flickr
1533720_443637199072277_684771883_n by vivala3nicky, on Flickr
well yeah its time for the new wheels but first got to sell the current wheels
WHEELS WILL BE OFF THE CAR THE DAY AFTER SOWO (MAY 19th)
Price- new price $3650! why? well because after everything these were just around $5,000 and countless trips back and forth and s h i t load of polishing!
Location- 08234, NJ bring cash! NO TRADES! I got beer!
Shipping! buyer pays for shipping! iv shipped wheels all over the states yes they will be packed 100% secure along with tracking and insurance!
SPECS
Originally bbs rs model 321 17x9 et40
they were reinserted to 5x120 back pads were machined to gain more offset and center bore is 72.56mm to be exact not a mm off! nice and tight! like you know what
Centers were powder coated by tom over at espo-powdercoating
Original BBS hardware fully polished
Inner Barrels are mirror polished as well
Half Hex caps full polished
BBS logos full polished
BBS Valve stems
REARS- 18x11.5 et21 3.5 inch lips wrapped in 245/40/18 falken 912s 95% no camber wear
FRONTS- 18x10 et21 3 inch lips wrapped in 225/40/18 falken 912s 95% no camber wear
Condition- 9.5/10
OMG THEY FIT? yes no s h i t they fit! I didnt mess with my front at all didnt cut anything didnt roll didnt remove inner plastics! front camber is set at -4.2 degrees , rear slightly cut and rolled (not pulled) -3.9/-4 degrees of camber no rubbing front and rear!
pics! yes finally this guy stfu and put up some pics!
13370420304_bccb0dc753_b by vivala3nicky, on Flickr
securedownload by vivala3nicky, on Flickr
securedownload (2) by vivala3nicky, on Flickr
securedownload (3) by vivala3nicky, on Flickr
13366978964_6d3554693b_b by vivala3nicky, on Flickr
securedownload (1) by vivala3nicky, on Flickr
13366977694_9ecde7a90a_b by vivala3nicky, on Flickr
13366965144_205ac4ffb3_b by vivala3nicky, on Flickr
13366742743_ab15ba5065_b by vivala3nicky, on Flickr
13366736653_62de13ce4b_b by vivala3nicky, on Flickr
1533720_443637199072277_684771883_n by vivala3nicky, on Flickr
Comment