Tweet
DESMOND WISE SPORTS - 17" Staggered JDM 3 Piece splits
DESMOND WISE SPORTS of Japan
Based in UK
These are a rarer variant of the REGAMASTER.
3 Piece Split wheels
17"
5 x 114.3
Stainless rim bolts (super fat) held in with 12mm nuts!
4 x Original brass badges
4 x original center caps
9J ET 35 Rear
7.5J ET36 Front
Stupidly good looking and stupidly rare wheels, a lovely staggered setup with a nice deep rear dish.
[/URL]
Obviously an absolute state as they are now but everything is there and once complete these will be somewhere in the top of the worlds most wanted.
Work to be carried out as follows
Centers: blasted, etched, powder coated gloss white, lilac pearl coat, gloss powder top coat.
Dishes: Any kerbing welded and smoothed over, polished to a mirror finish and 2 coats of rim wax
Bolts: Each one mirror polished
Barrels: Blasted in and out, powder coated purple all over and gloss coat
Centers will be stripped of the DIY paint, sanded and smoothed to crystal clear revealing the big cat underneath
One bad point is that one of the wheels have had some minor welding work around the inside of one wheel, only small cracks. These welds will look extremely tidy and will not affect the structure nor trueness of the wheel. They sit beneath the powdercoat so will deffo not be noticed
Im chasing £1200 with all the work carried out too.
Feedback appreciated
James
+447960657511
wheelhore@rocketmail.com
Examples...
Based in UK
These are a rarer variant of the REGAMASTER.
3 Piece Split wheels
17"
5 x 114.3
Stainless rim bolts (super fat) held in with 12mm nuts!
4 x Original brass badges
4 x original center caps
9J ET 35 Rear
7.5J ET36 Front
Stupidly good looking and stupidly rare wheels, a lovely staggered setup with a nice deep rear dish.
[/URL]Obviously an absolute state as they are now but everything is there and once complete these will be somewhere in the top of the worlds most wanted.
Work to be carried out as follows
Centers: blasted, etched, powder coated gloss white, lilac pearl coat, gloss powder top coat.
Dishes: Any kerbing welded and smoothed over, polished to a mirror finish and 2 coats of rim wax
Bolts: Each one mirror polished
Barrels: Blasted in and out, powder coated purple all over and gloss coat
Centers will be stripped of the DIY paint, sanded and smoothed to crystal clear revealing the big cat underneath
One bad point is that one of the wheels have had some minor welding work around the inside of one wheel, only small cracks. These welds will look extremely tidy and will not affect the structure nor trueness of the wheel. They sit beneath the powdercoat so will deffo not be noticed
Im chasing £1200 with all the work carried out too.
Feedback appreciated
James
+447960657511
wheelhore@rocketmail.com
Examples...