StanceWorks » Style » Builds

[Sunday]

I've had 2 Polo 6n's before. When my last one went to shit, i decided to go for a new model, this little 6n2 popped up on the cheap, knowing alot of my stuff would fit, i decided to go for it.

Current spec to date:
MK6 Golf Gti steering wheel.
Rayvern hydraulics rear airbags.
XXR 527's, 15x8.25 wrapped in 175/50 Hankooks.
Smooth front rub strip.
Deleted badge on the boot.
JOM 6n coilovers on the front - awaiting arrival of custom FK fully adjustable struts/fire stone bags.
Stubby mirrors.
Pioneer double din.
Audison SRX2s amp.
2xHertz HX250D subs.
Hertz HSK165 mids, with Hertz ET-20 tweeters.

[Nagah]

How did you manage the GTi steering wheel mounted? As far as I know there were some incompatibilities with the old and the recent airbag technologies. Because I seriously would love to have one of these new wheels in my ride too. (Or is your airbag disabled?)

[Sunday]

Originally Posted by Nagah

How did you manage the GTi steering wheel mounted? As far as I know there were some incompatibilities with the old and the recent airbag technologies. Because I seriously would love to have one of these new wheels in my ride too. (Or is your airbag disabled?)

The airbag isn't wired in at the moment. It will be though, there is a thread somewhere on UKMIV's forum explaining how to rewire them. The spline for the steeringwheels are the same, the ring to turn the indicators and connect the horn doesn't fit properly, so i've made a bracket to mount it, i'll take a picture at some point for you. I have a set of multifunctional steering wheel buttons from the same wheel i want to try and wire up too, that'll be an interesting one.. Ha.

[YUNOstance]

definitly black rooooof.

[Nagah]

Originally Posted by Sunday

The airbag isn't wired in at the moment. It will be though, there is a thread somewhere on UKMIV's forum explaining how to rewire them. The spline for the steeringwheels are the same, the ring to turn the indicators and connect the horn doesn't fit properly, so i've made a bracket to mount it, i'll take a picture at some point for you. I have a set of multifunctional steering wheel buttons from the same wheel i want to try and wire up too, that'll be an interesting one.. Ha.

Thanks mate, looking forward to the pictures. (Could you also gimme that link on how to rewire the wheel?) And I agree: Black roof!

[Sunday]

Originally Posted by Nagah

Thanks mate, looking forward to the pictures. (Could you also gimme that link on how to rewire the wheel?) And I agree: Black roof!

Nah man, full respray in a different colour No black roof

Yeah i'll find it for ya.

[Sunday]

Just a few to keep it alive. This is the happiest i've been with a car since the purple 6n rolled out the bodyshop when i took the first set of photos. Genuinely stoked.

[Sunday]

Did some arch work and played around a little yesterday Theres room in the arch, to go lower. NEED TO TOUCH RIM.

[244Brick]

you sure your tires or LCAs aren't touching the chassis?

[Sunday]

LCA's? Nothing is touching the chassis or the body

[Sunday]

Some of you may know what this means...



IT'S COMING. Waiting on loads of parts from other countries atm, some will be here next week... :twisted:
Did a slight bit more arch work on the drivers side, bumper mount? WHAT bumper mount..