StanceWorks » Style » Builds

[Specv118]

*watching*

[brownishwater]

It always amazes me what you British and European people are able to do in such small spaces. Since I am a bitch, this type of build would require a massive garage, air compressors everywhere, lifts, etc.

Not even considering the lack of space you have to work with, brilliant work so far. Sub'd for badassery.

[electricalbox]

Great work, when I saw the 13.5" rears with a 315 I fell in love so much more!

[Kruizer]

Originally Posted by AndreasW

RX8 + SR20

Great work so far!

Thanks very much...

Originally Posted by chik-n-little

This is more than a great start, I love the way your build is heading. Never scene a sr-20 swap in one of these. Should be dope

There are a few done alright, nice vid of youtube of one fella...

Originally Posted by Chigga

You are what we called a do-er, and a great one at that.

Wait till you see my KP61 finished I'm building two cars atm...

Originally Posted by trystanz

This is so cool, I cant wait to see what kinda numbers the 8 puts down with the sr20

Same spec build as mine is making 425bhp at the fly in a ps13, I'd be hoping for around 400bhp...

Originally Posted by Minuki

This is going to be incredible.

Wouldn't go that far, should be cool alright...

Originally Posted by Specv118

*watching*

Waiting LoL

Originally Posted by brownishwater

It always amazes me what you British and European people are able to do in such small spaces. Since I am a bitch, this type of build would require a massive garage, air compressors everywhere, lifts, etc.

Not even considering the lack of space you have to work with, brilliant work so far. Sub'd for badassery.

Irish and Proud dude I'm a typical fella, I like a tight fit...

Originally Posted by electricalbox

Great work, when I saw the 13.5" rears with a 315 I fell in love so much more!

And thats even stretched The 335's were too dear and I won't even talk about the 365's...

So just a small update, I was onto Brian in Driftkits.eu and looking for a vent to build into my own bonnet, so he cut up an S15 skin he had in stock, legend ! Looking forward to fitting it once it arrives



And the next pic is probably my favourite of the thread to date, I got a set of Bride Fixed back seats in red and head protection, saw them in Ffrenchie’s ages ago but a mate of mine bought them, they came up for sale so I bit the bullet and doubled my budget on seats, should look awesome in the car…

[Kruizer]

Finished removing all the glue with petrol left over from the sound deadening, took off the heat cover under the bonnet, lined up the vent and have it ready for cutting tomorrow

Weird looking bonnet...


Everything outside the masking tape is now waste, will have to fit the vents seperately to avoid the standard dip in the original bonnet...

[got splits?]

Originally Posted by Anonymoose

You are one fast working fucker!

Can't wait to see this

Fucking this

Looks like an awesome build!

[Bennett]

i fuckin love when people do shit like.

p.s., the mazda community probably hates you for ditchin the wankel.

[Kruizer]

Originally Posted by got splits?

Fucking this

Looks like an awesome build!

Thanks fella, I'll give it a lash for the laugh LoL

Originally Posted by Bennett

i fuckin love when people do shit like.

p.s., the mazda community probably hates you for ditchin the wankel.

Yep, they are like why not fit a 13b or 20b ? Ah I don't mind plus in fairness they are pretty sound, just asking the question

Have the bonnet marked up ready for cutting tomorrow...


How it should look...


Said I'd resort to using the Limerick method of removing the spoiler...


Debadged and spoiler off, just getting the last few shitty bits done before she goes away Sunday...

[Rubens]

Keep on goingggg!

[jimbo]

Sick!!!

[Kruizer]

Originally Posted by Rubens

Keep on goingggg!

Trying, no more daily updates after tomorrow...

Originally Posted by jimbo

Sick!!!

Cheers

Got the windscreen out this morning :


Cut the outer skin and lined the vents up again :


Matched the vents to the inner skin, chop, chop :


Sorted :


Boot door off so I can work on it while the car is away :


Will also build the bonnet up while she is being caged, almost ready for transport tomorrow :

[ollycarbs]

wow, insane project! Can't wait to see more!

[e30polak]

Just read through your whole Tezza thread, and I was speechless. That has to be one of my favorite builds to date!

After seeing what you did to that beast, I'm even more excited to see the direction of this car!

[Kruizer]

Originally Posted by ollycarbs

wow, insane project! Can't wait to see more!

Me too Thanks dude

Originally Posted by e30polak

Just read through your whole Tezza thread, and I was speechless. That has to be one of my favorite builds to date!

After seeing what you did to that beast, I'm even more excited to see the direction of this car!

Thanks mate, I miss her, could have gone alot better but wanted a track car more so.

This one won't be as fancy, more function over form, don't ban me yet LoL It'll still be stanced !

And she is gone, Bear collected her today and she is now sitting up in Mr. Stones. Next updates will be alot more exciting, rollcage baby

[axelillo_PR]

Damn do you have a day job?

[Kruizer]

Originally Posted by axelillo_PR

Damn do you have a day job?

Ya dude, just tip away in my free time but I'm sure you know yourself it ain't easy with herself and the little man takintg up most of my time

Well since the car is gone I decided to do a bit on the bonnet, ground down the edges of the bonnet and under the vents so they sealer could bite into something :


Used the usual pop rivets to hold them in place while the sealer set but looking good so far :


The underneath just needs the lines tidied up a bit so they are even but all in all I'm happy enough...


Time to make it look original using a sanding disc on the grinder :



First coat used a 50/50 mix of filler and fibreglass, my poor garage, **** the stuff :



Will try get the outer skin finished off tonight and get to work on the underneath sometime this week...

[LaMaR-]

Looks sick...

[Rubens]

nice job!

[P78]

for teasers sake

u should put the 13's on now and take pic



serious work u put in this!

[Kruizer]

Originally Posted by LaMaR-

Looks sick...

Thanks fella

Originally Posted by Rubens

nice job!

Sound dude...

Originally Posted by P78

for teasers sake

u should put the 13's on now and take pic



serious work u put in this!

They are behing the bonnet in the last pic for teasers sake LoL Car is away now getting cage in a different part of the country. Bout 100miles or so away, should be back next month !

[ionz]

good on ya. finished the hood yet?

[Kruizer]

Originally Posted by ionz

good on ya. finished the hood yet?

Not yet, been busy with other things

I just had a spare hour last night so I cut away the underneath of the bonnet, I left the bulk section at the front for strength but also I cut it on either side, bent it back and bonded it to the skin, it now allows the vents to work properly, I will tidy it all up once I get a chance as it is very rough atm...

[Kruizer]

Got a few phone pic's off the man himself, Mr. Stone, very happy with the cage and parcel shelf removal, next up pedal box and hydro

[way2fastx3]

Such great progress so far. Keep it up!

[Madhatter]

My God, This is awesome, you work fast man! I love the motor choice!