I want to show my progress on VIP style make...from first day till today:
Basic car:
So, first I bought vip wheels -
19" Work Euroline DH
spec:
19x9 +30 front
19x10 +25 rear
Pic of wheel:
Like You see corrosion start eating clear coat:
So first step was refinish the centers. Clear coat removed with paint stripper:
Next, sanded down all corrosion:
Wheels was in brushed aluminium effect, I love that type of finish and I decided to keep same effect.
It's impossible to make perfect effect by hand. I lift up the back of the car I make wheels spinning and I touch with 240 grid sandpaper:
Then some polish with metal polish compound
Next some oil and grease remover to prepare wheel for painting:
Basic car:
So, first I bought vip wheels -
19" Work Euroline DH
spec:
19x9 +30 front
19x10 +25 rear
Pic of wheel:
Like You see corrosion start eating clear coat:
So first step was refinish the centers. Clear coat removed with paint stripper:
Next, sanded down all corrosion:
Wheels was in brushed aluminium effect, I love that type of finish and I decided to keep same effect.
It's impossible to make perfect effect by hand. I lift up the back of the car I make wheels spinning and I touch with 240 grid sandpaper:
Then some polish with metal polish compound
Next some oil and grease remover to prepare wheel for painting:
Comment