 |
|
08-22-2011, 03:24 PM
|
#1
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Visitor
- Join Date: Aug 2011
- Posts: 44
- User Status:
Offline
|
Adaptec Speedware - Dedicated to Fitment
Welcome to Adaptec Speedware!
We're here to provide you with the finest spacers, adapters, and hub rings you can find.
We're here to answer any questions regarding fitment, poke, flush, and how you should go about achieving the stance you've been day/night dreaming about.
Check out this article on our facility and manufacturing process.
We've been in the business since 1996, and it's hard to find something we can't build, so no matter how weird you think it is, we can build it.
The bottom line is simple - We're glad you're here, and we look forward to helping you get dialed.
Last edited by jr@adaptecspeedware; 08-31-2011 at 01:22 PM.
|
|
|
|
|
08-22-2011, 05:18 PM
|
#2
|
|
StanceWorks Addicted
- Join Date: Mar 2010
- Posts: 815
- User Status:
Offline
|
Sweet! Welcome Jr!
|
|
|
|
|
08-22-2011, 05:34 PM
|
#3
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Visitor
- Join Date: Aug 2011
- Posts: 44
- User Status:
Offline
|
Thanks Jeremy! Can't wait till you get your new stuff.. and then get bored in 3 months and start the cycle again haha.. Big ups to you for always trying something new!
|
|
|
|
|
08-22-2011, 06:27 PM
|
#4
|
|
StanceWorks Addicted
- Join Date: Mar 2010
- Posts: 815
- User Status:
Offline
|
Quote:
Originally Posted by jr@adaptecspeedware
Thanks Jeremy! Can't wait till you get your new stuff.. and then get bored in 3 months and start the cycle again haha.. Big ups to you for always trying something new!
|
You know me too well 
|
|
|
|
|
09-02-2011, 02:47 PM
|
#5
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Visitor
- Join Date: Aug 2011
- Posts: 44
- User Status:
Offline
|
A little holiday weekend bump from a Canadian car.. thanks Bojan!
|
|
|
|
|
09-12-2011, 07:21 AM
|
#6
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Regular
- Join Date: Aug 2011
- Posts: 292
- User Status:
Offline
|
up top for H20
|
|
|
|
|
09-14-2011, 11:59 PM
|
#7
|
|
StanceWorks Visitor
- Join Date: Jun 2011
- Location: Central California
- Posts: 154
- User Status:
Offline
|
how much for two sets of 4x100 to 5x130 adapters? two 25mm and two 35mm?
|
|
|
|
|
09-15-2011, 11:40 AM
|
#8
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Visitor
- Join Date: Aug 2011
- Posts: 44
- User Status:
Offline
|
Quote:
Originally Posted by drosas
how much for two sets of 4x100 to 5x130 adapters? two 25mm and two 35mm?
|
PM sent!
|
|
|
|
|
09-15-2011, 03:11 PM
|
#9
|
|
StanceWorks Member
StanceWorks OG
- Join Date: Mar 2009
- Location: Mill Creek WA
- Posts: 2,677
- User Status:
Offline
- Contact this user:
|
odd request... single spacer with hub ring built in?
__________________
no big deal |
|
|
|
|
09-15-2011, 04:48 PM
|
#10
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Visitor
- Join Date: Aug 2011
- Posts: 44
- User Status:
Offline
|
Quote:
Originally Posted by TheNeek
odd request... single spacer with hub ring built in?
|
Nope! Not odd at all. What size do you need?
|
|
|
|
|
09-15-2011, 06:10 PM
|
#11
|
|
StanceWorks Member
StanceWorks OG
- Join Date: Mar 2009
- Location: Mill Creek WA
- Posts: 2,677
- User Status:
Offline
- Contact this user:
|
Quote:
Originally Posted by jr@adaptecspeedware
Nope! Not odd at all. What size do you need?
|
4x100, 3mm thk, I need to measure the cb of the odd wheel. I'll make contact when the car is up in the air again.
__________________
no big deal |
|
|
|
|
09-15-2011, 06:37 PM
|
#12
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Visitor
- Join Date: Aug 2011
- Posts: 44
- User Status:
Offline
|
Quote:
Originally Posted by TheNeek
4x100, 3mm thk, I need to measure the cb of the odd wheel. I'll make contact when the car is up in the air again.
|
Sweet, sounds good, just let us know.
|
|
|
|
|
09-19-2011, 10:09 AM
|
#13
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Regular
- Join Date: Aug 2011
- Posts: 292
- User Status:
Offline
|
|
|
|
|
|
09-23-2011, 06:05 PM
|
#14
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Visitor
- Join Date: Aug 2011
- Posts: 44
- User Status:
Offline
|
Hope you're all at H20i right now!
|
|
|
|
|
09-23-2011, 09:00 PM
|
#15
|
|
Professional High-Sider
StanceWorks Regular
- Join Date: Aug 2009
- Location: Seattle
- Posts: 383
- User Status:
Offline
|
PM'd ya
__________________
*~* Yamaguchi-gumi Syndicate Member #59,005 *~* // Bippu-Car \\
|
|
|
|
|
09-26-2011, 12:22 PM
|
#16
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Visitor
- Join Date: Aug 2011
- Posts: 44
- User Status:
Offline
|
Replied!
|
|
|
|
|
09-26-2011, 01:15 PM
|
#17
|
|
StanceWorks Visitor
- Join Date: Sep 2011
- Posts: 32
- User Status:
Offline
|
Pm'd
|
|
|
|
|
09-27-2011, 12:21 PM
|
#18
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Visitor
- Join Date: Aug 2011
- Posts: 44
- User Status:
Offline
|
PM returned!
|
|
|
|
|
09-28-2011, 12:37 PM
|
#19
|
|
W201 FTW
StanceWorks Regular
- Join Date: Mar 2011
- Location: Pittsburgh, PA
- Posts: 451
- User Status:
Offline
|
PM sent!
__________________
Balls Deep Squad.
|
|
|
|
|
09-28-2011, 12:47 PM
|
#20
|
|
StanceWorks Visitor
- Join Date: Aug 2011
- Location: England, Lincolnshire
- Posts: 67
- User Status:
Offline
|
hi im after some 4x100 to 5x112 adapters 2 18mm and 2 30mm, with custom hub bore and wheel bore, could you inbox me please ?
heres a picture of what im after
|
|
|
|
|
09-30-2011, 06:39 AM
|
#21
|
|
StanceWorks Regular
- Join Date: Mar 2011
- Location: 302/718
- Posts: 324
- User Status:
Offline
|
PM sent about some spacers!
|
|
|
|
|
09-30-2011, 08:11 AM
|
#22
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Regular
- Join Date: Aug 2011
- Posts: 292
- User Status:
Offline
|
pm me or send email to sales@adaptecspeedware.com for the fastest response
|
|
|
|
|
01-02-2012, 04:19 PM
|
#23
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Regular
- Join Date: Aug 2011
- Posts: 292
- User Status:
Offline
|
Bump this up from the dead. Back in full swing. Our standard 7 to 10 day build time is in effect for custom orders with a lot of popular spacer thicknesses in stock. email us at sales@adaptecspeedware.com for all your fitment needs. let us know you're from Stanceworks and get a 15% discount.
|
|
|
|
|
01-05-2012, 01:22 PM
|
#24
|
|
StanceWorks Addicted
- Join Date: Feb 2010
- Location: Gouda, the Netherlands
- Posts: 740
- User Status:
Offline
|
So guys, what's the thinnest adapter you could make? I'm looking to bolt up some 5x120.7 wheels to my 4x100 car. Thanks!
__________________
|
|
|
|
|
01-09-2012, 01:07 PM
|
#25
|
|
STANCE|WORKS Sponsor
-SPONSOR-
StanceWorks Regular
- Join Date: Aug 2011
- Posts: 292
- User Status:
Offline
|
Quote:
Originally Posted by DDM
So guys, what's the thinnest adapter you could make? I'm looking to bolt up some 5x120.7 wheels to my 4x100 car. Thanks!
|
in those bolt patterns, 18mm. most others 15mm.
|
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 06:27 AM.
|
