Announcement

Collapse
No announcement yet.

my e36 custom skid plates. trial and error tested for over a year.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • my e36 custom skid plates. trial and error tested for over a year.

    I've been I the process over a year testing my skid plate. fixing the errors and finding
    out where the flaws could be.
    duplicated my skid plate yesterday and selling this one now,

    comes with the nurserts that need to be installed in the subframe with the Allen bolts that fit flush in the skidplate do the heads don't get worn down, the holes are countersunk, I also provide a 3/8 thick 3x16 aluminum spacer that goes In between the skidplate and subframe. the skid plate sits up higher then an xbrace. xbraces end up bending into your oil pan and eventually will crack your pan. skidplate has about 1/4 inch or more clearance from the oil pan. the rear of it bolts directly to your frame rails. messag me of interested.


    oh and I'm pretty low. trust me when I say my skid plate saves.

  • #2
    i would be much more interested if you had listed a price...
    gooby pls

    Comment


    • #3
      Quality looks on point, nice work

      Comment


      • #4
        Originally posted by Ieatpeople View Post
        i would be much more interested if you had listed a price...
        price is right around a new xbrace. $200 plus shipping.

        Originally posted by SeanDub View Post
        Quality looks on point, nice work
        thanks

        Comment


        • #5
          Killer price too, props to you

          Comment


          • #6
            Nice work Shaunnnaayy
            I dislike Byron.

            Comment


            • #7
              your not even low shaun :p

              I'll seriously end up buying one. just have to come down and give you an old dryhandski
              http://http://www.stanceworks.com/20...-cares-e36-m3/

              http://ultimateklasse.com/2012/07/anthony-cares-e36-m3/

              Comment


              • #8
                Originally posted by carebearM3 View Post
                your not even low shaun :p

                I'll seriously end up buying one. just have to come down and give you an old dryhandski
                oh shush fool.

                Comment


                • #9
                  Originally posted by got splits? View Post
                  Nice work Shaunnnaayy

                  Comment


                  • #10
                    Any additional pictures of it installed? Works in conjunction with MM under panel?

                    Is that your license plate under there as well, lol

                    Comment


                    • #11
                      Originally posted by Liquid10 View Post
                      Any additional pictures of it installed? Works in conjunction with MM under panel?

                      Is that your license plate under there as well, lol
                      I can get you more pictures, but mine is a little but different then the one that I just made. the one on my car has two more holes drilled for more nutserts but they don't line up with the m10 nutserts. I was originally using 4, m8 nutserts. but the two m10s are easier to work with. and if you look at the skid plate on my car it has those two triangle cut outs for the steering rack bolts, the skid plate would hit them. I put the bolts that way for testing. the new plate I made doesn't need the cut outs. lol no that's not my license plate. i pop riveted that on to the sheild of my fuel filter. haven't relocated it yet. I don't know what the mm underpanel is.

                      Comment


                      • #12
                        The MM is the Motion Motorsport underpanel

                        Comment


                        • #13
                          Originally posted by Liquid10 View Post
                          The MM is the Motion Motorsport underpanel
                          looks to me that it will work, but they won't bolt together.

                          Comment


                          • #14
                            i wish i had something like this for my e46. the aluminum brace they come with wear through way too fast

                            Comment


                            • #15
                              Originally posted by Dibaltic View Post
                              i wish i had something like this for my e46. the aluminum brace they come with wear through way too fast
                              well my friend has a e46 so I'm sure I can use his car to fab up something for you.

                              Comment

                              Working...
                              X