++**"Help me identify this wheel!" Thread.**++

[Gvfc2]

Possible Enkei

Seller says they are Enkei I would like to make sure and what model. They are 17 inch 4x100. Nothing else is known.

[KyleAnderson]

Seller says they are Enkei I would like to make sure and what model. They are 17 inch 4x100. Nothing else is known.

They're OEM Scion Xa wheels made by Enkei for the "Release Series 1.0" model. They're 17x7 et30, 4x100, and 54.1mm center bore.

[Gvfc2]

I

They're OEM Scion Xa wheels made by Enkei for the "Release Series 1.0" model. They're 17x7 et30, 4x100, and 54.1mm center bore.

Thanks now i know they will work on my car which has a stock et35 or 38 not 100%

[zoo]

I

Thanks now i know they will work on my car which has a stock et35 or 38 not 100%

Do you think they are worth 350? With "good" tires

This is not the place to ask that.

[Gvfc2]

This is not the place to ask that.

Ok. Sorry about that i will edit that part out. What would be the place to ask?

[MrG22]

Hey Gents,

I just picked up a set of staggered porsche techart wheels. i know they are pretty much the same as the mito m1's, however, i need more information if there is anything else special about the wheels besides stating techart on a spoke. maybe even some specs like what kind of porsche they are off of. they are 17x8.5 and 17x10 and all of them say type 49 on the back.

here are some pics for reference

[zoo]

Its an OZ Mito made for Techart. Nothing special about them other than that.
Im guessing you're trying to list them for sale an need to know the value and what car (WB/NB) to advertise them for?
If so, this is not the place to ask those questions .

[MrG22]

Its an OZ Mito made for Techart. Nothing special about them other than that.
Im guessing you're trying to list them for sale an need to know the value and what car (WB/NB) to advertise them for?
If so, this is not the place to ask those questions .

thanks for the info.

wrong gues, these are going in my personal collection, i know they are from a porsche, i was curious on if there was a specific model they came on to do more research

[Mudcoatedgolfer]

Anybody ID these? I'm trying to find a set of caps for when I get around to refinishing them. They've got epsilon stickers on the barrels but no model name




Sent from my iPhone using Tapatalk

[miike]

Ok so I know what my wheels are, they're OZ Cromodora cw10 bully's. My question though is, does anyone know why, where, when or for what car these we're made in 5x112, 66.6 and in 8,5x17 et28 and 10x17 et18? I know there's a few sets in 8x17 et35, 57,1 cb, and that these are not made from those wheels since the sizes are stamped behind the spokes. I have tried emailing OZ and Cromodora both, but without any response. Also I hope my dropbox link works

https://www.dropbox.com/sh/pq28jtvf000ienx/AABEiRp-Du--6DCDomuI-A7Xa?dl=0

[electricalbox]

Removed

[StanceLyfe]

Anyone have any idea what these are ? http://i.imgur.com/gdbTNpS.jpg

[KyleAnderson]

Anyone have any idea what these are ? http://i.imgur.com/gdbTNpS.jpg

That's tough to ID from a blurry rolling shot. Something like SSR SP1, Work Meister, or Rays Lexion 203 would get you close.

[Fetka]

Need help ASAP.
Seller claims these are BBS. Specs - 18", 8,5J, ET40
Does anyone know model of these? I thought that I'm a BBS wheel whore, but if these turn out to be legit BBS wheels, than I might be wrong haha.




More here: http://www.autogidas.lt/bbs-r18-111152713.html

Thanks in advance!

[Fetka]

Since I've went through every single BBS catalogue, I believe these are different brand wheels.
Still hoping for any help.

Thanks