HRE 546 18x9.5/12 5x114.3

[zoo]

HRE 546, three piece.
Brushed faces/polished lips.

Staggered, 18x9.5 18x12
Offsets: F +26mm R 0mm
5x114.3 PCD, 75mm center bore

No cracks, bends or welds. Straight and true.
The faces are bare aluminum, so getting them cleared is a good idea.
The rears have not been sealed yet, will be sealed before shipping.
Some nicks and imperfections present. See album.
New stainless lock nuts. Waiting on new centercap logos.

Sold

Shipping/insurance to the lower 48 states is included in the price.
Located in Dallas, TX.

Album: http://imgur.com/a/JgNIi

[justlikechuck]

How wide are the lips? Sandwich mounted rears?

[vten]

Damn !! Sell me just the centers !

Are the centers have the same thickness measured from the back hub ?

[zoo]

How wide are the lips? Sandwich mounted rears?

fronts are 2.5, rears are 5. I have a set of 4" lips for the fronts, if interested.
Face mounted on all 4.

Damn !! Sell me just the centers !

Are the centers have the same thickness measured from the back hub ?

Ha. Not parting them.
Fronts have a thicker hub area.

[justlikechuck]

Alright, how big are the holes for the bolts?

[zoo]

Alright, how big are the holes for the bolts?

Are you asking about the bolts that hold the wheel together? They use 8mm bolts.
Or the lug nut holes?

[justlikechuck]

Are you asking about the bolts that hold the wheel together? They use 8mm bolts.
Or the lug nut holes?

Oh sorry, i mean the lug nut holes

[zoo]

The lug nut holes are 15mm. So 14mm bolts will fit, if you are using bolts. Tapered seats, not ball.

[zoo]

Center cap stickers arrived, will post pictures this afternoon.

[vten]

Damnit .. Kept checking on your post .. Lol

What's the outer and inner specs on front and rear ?

Thx man

[zoo]

Wheels are sold