Reverse Mounted Enkei Meshies

AMGwheelwhore · 01-02-2012, 03:27 PM

Up for sale are my reverse mounted Enkei mesh wheels, the lips have been fully polished and look great. Rears a real deep dish thanks to the reverse mount. They are fake splits and the barrels are welded, but the bolts can still be removed. $700 SHIPPED

Specs: 15x7 ET -13
15x8.5 ET -32

PCD: 5x120.65 (Chevy/Corvette)

Sorry there a bit dirty from polishing still

wheelex · 01-03-2012, 01:48 AM

wink

DDM · 01-03-2012, 05:33 AM

Shit, I'd be all over these, but the rears are just too extreme, I'd never be able to fit them

DDM · 01-04-2012, 11:03 AM

Unless they can be redrilled to 4x100...
Do you think that's possible on these?

AMGwheelwhore · 01-04-2012, 11:36 AM

Quote:

Originally Posted by DDM

Unless they can be redrilled to 4x100...
Do you think that's possible on these?

Im not really sure.. Il post some pics of the backside of them when I get off work. But shipping the Netherlands will prob cost a fortune.

Francois Dillinger · 01-04-2012, 04:06 PM

welded splits =/= fake splits. these are dope, however i doubt they can be redrilled to 4x100 due to the face style. you need to do a 5 lug swap

DDM · 01-04-2012, 04:49 PM

Quote:

Originally Posted by Francois Dillinger

welded splits =/= fake splits. these are dope, however i doubt they can be redrilled to 4x100 due to the face style. you need to do a 5 lug swap

With a lot of fab work, I could get 5x120's on there, but it still wouldn't match exactly.
Adapters would probably be way too thick, I believe the thinnest are about 20mm, which would make them -52... -32 is already gonna be reaaaaly tight on an e21, I really can't use those extra 20mms...

AMGwheelwhore · 01-05-2012, 09:28 AM

Quote:

Originally Posted by DDM

With a lot of fab work, I could get 5x120's on there, but it still wouldn't match exactly.
Adapters would probably be way too thick, I believe the thinnest are about 20mm, which would make them -52... -32 is already gonna be reaaaaly tight on an e21, I really can't use those extra 20mms...

The best bet would probably be to go the adapter route, 4x100 to 5x120.7 is a cheaper alternative and fairly common set up on alot of cars.

DDM · 01-05-2012, 10:53 AM

Yeah, I figured that, but I can't really use another 20 mm on these already super agressive wheels...
I'm gonna think about it, but GLWS!

TheNeek · 01-05-2012, 01:41 PM

Fill and Drill

AMGwheelwhore · 01-06-2012, 08:41 AM

Up

AMGwheelwhore · 01-06-2012, 05:23 PM

Will trade for staggered Salad Shooters or Porsche wheels

AMGwheelwhore · 01-08-2012, 12:55 PM

ttt

DDM · 01-08-2012, 01:21 PM

Could you get a pic from the rear? Maybe I could shave some off that and get really thin adapters...
Also, could you look into what shipping might cost?

AMGwheelwhore · 01-08-2012, 02:17 PM

Quote:

Originally Posted by DDM

Could you get a pic from the rear? Maybe I could shave some off that and get really thin adapters...
Also, could you look into what shipping might cost?

Il take a pic later on this evening, and I have no idea what that might cost, if your serious PM me your info and il see what I can do. It probably won't be cheap though...