yaaasssss this looks awesome. paint looks real solid now. just need a good set of photos to show it off.
Announcement
Collapse
No announcement yet.
Euro Spec Kouki Silvia
Collapse
X
-
Originally posted by DUTCHswift View Postyaaasssss this looks awesome. paint looks real solid now. just need a good set of photos to show it off.IG @Hansolbakken
Comment
-
So its been some time since the last update, I've mainly been driving and enjoying the car during the summer season and traveled to a couple of meets, C&C and such
Anyway now that winter is coming the car has been put into hibernation and as usual it will undergo some maintenance and upgrades.
Lately the car hasnt been prioritized due to work on my S13 driftcar.
in short the S13 was bought some years ago completely disasemmbled with all the parts needed for a complete driftbuild shoved away somewhere in the garage.
lately it's gotten a R33 brakeupgrade, some steering angle mods and a fuelcell setup 90% complete, will take some pics of this later on
The rollcage built by the P.O was a hasty and complete sh't job so have started building a new one, hopefully the driftcar is ready for next season.
IMG_20171004_220600 by Nikolai Solbakken, on Flickr
IMG_20171004_220607 by Nikolai Solbakken, on Flickr
Plans for the S14 however is rebuilding all of the suspension components, rust repair and undersealing the car with bedliner of some sort. this + the usual S-chassis upgrades.
Pulling the subframe and various components, going to get glassblasted and painted, will get poly bushings everywhere aswell.
IMG_20170912_220430 by Nikolai Solbakken, on Flickr
IMG_20170923_011706 by Nikolai Solbakken, on Flickr
IMG_20170923_011655 by Nikolai Solbakken, on Flickr
Got some new oem metal fenders from a Sportline Edition 200SX, these will get widened and a blinker delete, also glassblasting these
IMG_20170523_193120 by Nikolai Solbakken, on Flickr
IMG_20170523_220848 by Nikolai Solbakken, on Flickr
IMG_20170524_205738 by Nikolai Solbakken, on Flickr
''Some'' bondo has been used.
And to finish of this weak update with some shots of the current inventory in the garage and my S14 in its natural habitat
IMG_20170908_211746 by Nikolai Solbakken, on Flickr
IMG_20170909_015631 by Nikolai Solbakken, on Flickr
Will try to update more frequently as I'm spending all my freetime building these two S-cars and helping out with various other projects.IG @Hansolbakken
Comment
-
Small update,
Cage for the S13 is nearing completion, waiting on the final bits of piping then we can move along to the fuel system and assembling and prepping for paint
IMG_20171008_011008 by Nikolai Solbakken, on Flickr
IMG_20171008_011024 by Nikolai Solbakken, on Flickr
also tinted the taillights all red as they were plastidipped black..
IMG_20171009_212723 by Nikolai Solbakken, on Flickr
Picked up some wider 3 inch outerlips for the front, also test fitting with oem fenders before widening.
IMG_20171021_164626 by Nikolai Solbakken, on Flickr
IMG_20171021_164634 by Nikolai Solbakken, on Flickr
IMG_20171026_215559 by Nikolai Solbakken, on Flickr
Polished some spare outerlips I had laying around before putting them up for sale, both were in the same condition as shown on the before and after.
IMG_20171026_215159 by Nikolai Solbakken, on Flickr
Here you can see the diy workbench with a polishing machine, also the Advan 2 piece wheels for my daily driver ED6 Civic, all restored for next summer.
IMG_20171026_215545 by Nikolai Solbakken, on Flickr
IMG_20171026_215607 by Nikolai Solbakken, on Flickr
Got sidetracked and started on a Pod in the drivers door vent for a wideband gauge, not good at fibreglass and all that but we'll see how it turns out.
IMG_20171027_233404 by Nikolai Solbakken, on Flickr
IMG_20171029_010411 by Nikolai Solbakken, on Flickr
''Sanded'' down some of the rear suspension arms to bare metal, all got 2 layers of acid primer before 3 thick coats of black hammerpaint, currently waiting for new bushings.
IMG_20171028_204647 by Nikolai Solbakken, on Flickr
IMG_20171028_012714 by Nikolai Solbakken, on Flickr
IMG_20171028_220313 by Nikolai Solbakken, on Flickr
IMG_20171028_211609 by Nikolai Solbakken, on Flickr
IMG_20171028_220323 by Nikolai Solbakken, on Flickr
IMG_20171106_221253 by Nikolai Solbakken, on Flickr
IMG_20171106_221314 by Nikolai Solbakken, on Flickr
Dropped the idea of having the suspension parts sandblasted as a friend of mine has an acid bath at work,
so the cradle/rear subframe will be taking a bath over night before getting the same treatment as the rest of the suspension parts.
Hopefully it will turn out great and not be as prone to rust as these old Nissan are here on the coast in NorwayIG @Hansolbakken
Comment
-
Originally posted by LoweredSilverado View PostLove it.Originally posted by Dome View PostBeautiful result manOriginally posted by bev0 View PostEpic stuff going on here!
Done a few more things this week
Continued disassembling suspension bits, will need new ball joints for sure. Also dont mind the brake discs, they'll be replaced soon enough
IMG_20171114_203427 by Nikolai Solbakken, on Flickr
IMG_20171114_203433 by Nikolai Solbakken, on Flickr
some progress on the gauge pod, just an experiment and a learning experience at this point
IMG_20171114_203511 by Nikolai Solbakken, on Flickr
IMG_20171114_203516 by Nikolai Solbakken, on Flickr
Got all the old rubber bushings burned out of the subframe, used a screwdriver for the most part and should really insvest in a hydraulic press for the future..
IMG_20171117_231709 by Nikolai Solbakken, on Flickr
IMG_20171117_231719 by Nikolai Solbakken, on Flickr
Recieved my new poly bushings, the main ones ( not the diff ones ) were for the wrong car and didnt fit so have to wait some more
The whole suspension restoration is a lengthy procedure but in the end when it's all done the S14 will have a thighter rear end than half my Instagram feed.
In more exciting news, my buddy with a R32 GTR racecar got his widebody fenders I think theyre from Pandem but not really sure.
Anyhow the Skyline is seriously wide now and in desperate need for some wider rims
IMG_20171122_201721 by Nikolai Solbakken, on Flickr
IMG_20171122_201701 by Nikolai Solbakken, on Flickr
IMG_20171122_201741 by Nikolai Solbakken, on Flickr
That's all for nowIG @Hansolbakken
Comment
-
Originally posted by slamitall View Postawesome work, can't wait to see the widened fenders
Some more progress have been made this week
Continued sanding and acid priming suspension parts mostly.
IMG_20171123_211956 by Nikolai Solbakken, on Flickr
Removed some more parts off the underside of the chassis, exhaust shield and fuel tank shield.
IMG_20171129_214204 by Nikolai Solbakken, on Flickr
IMG_20171127_205922 by Nikolai Solbakken, on Flickr
Had the exhaust shield glassblasted and zinc primed, the fuel tank shield is in rough condition so we'll see what happens here.
IMG_20171130_200944 by Nikolai Solbakken, on Flickr
IMG_20171130_214556 by Nikolai Solbakken, on Flickr
Before and after sanding of some brake line shields.
IMG_20171202_023556 by Nikolai Solbakken, on Flickr
Decided to remove the fuel tank, as going through all this work and not undercoating on the topside of the fuel tank would be half-a**ed.
IMG_20171129_214231 by Nikolai Solbakken, on Flickr
IMG_20171130_214437 by Nikolai Solbakken, on Flickr
Topside is in good condition all things considered.
IMG_20171130_214455 by Nikolai Solbakken, on Flickr
Even found some corn of all things on the fuel tank, how did corn get here?
IMG_20171130_214642 by Nikolai Solbakken, on Flickr
I got a bad case of ''While im doing this, I might aswell'' during this project so decided to upgrade the stock fuel pump for a genuine 255Lph Walbro.
IMG_20171201_221537 by Nikolai Solbakken, on Flickr
IMG_20171201_234850 by Nikolai Solbakken, on Flickr
Got the rear subframe back from Acid Bathing, It didnt fit in the tank so had to do it in two stages.
We also took the decision that a plate on the subframe seemed weak so welded this aswell.
My friend who did the subframe decided acid bathing was not enough so it also got glass blasted,
Then I Zinc primed it and have started adding coats of different rust preventive primer before several coats of durable black hammerpaint next.
IMG_20171130_192751 by Nikolai Solbakken, on Flickr
IMG_20171130_192804 by Nikolai Solbakken, on Flickr
IMG_20171130_203607 by Nikolai Solbakken, on Flickr
IMG_20171202_012500 by Nikolai Solbakken, on Flickr
IMG_20171205_211920 by Nikolai Solbakken, on Flickr
Im now in need of more shelf space for the newly painted parts.
IMG_20171205_221042 by Nikolai Solbakken, on Flickr
That's all for this time, cheersIG @Hansolbakken
Comment
-
Did some more work the other day
Continued painting stuff, think the gold will be a nice touch.
IMG_20171213_213935 by Nikolai Solbakken, on Flickr
IMG_20171213_213942 by Nikolai Solbakken, on Flickr
Removed the oil cooler and pump for the differential. It has seen better days so not sure if I'll rebuild it or run without it.
IMG_20171220_222851 by Nikolai Solbakken, on Flickr
A previous owner has hacked the battery tray to pieces and it didnt look right to me
IMG_20171216_015720 by Nikolai Solbakken, on Flickr
An easy fix to the problem, squared up the hole so a plate could be riveted in. Grinded and zinc primed the surrounding area.
IMG_20171220_222914 by Nikolai Solbakken, on Flickr
Attached a bracket for the resirc/diverter valve. Did this so the hoses would be easier to route and not have sharp turns.
IMG_20171220_223318 by Nikolai Solbakken, on Flickr
IMG_20171220_223513 by Nikolai Solbakken, on Flickr
And fitted, still needs some paint but we'll get there. I dont put too much time into all of this since next winter I'll most likely remove the engine and paint the entire bay.
IMG_20171220_223704 by Nikolai Solbakken, on Flickr
A friend of mine started to work on his S14, this car has been used as a race/driftcar the past 10 ish year, so interestingely enough he will build it back to oem spec and get it street legal once again.
This car is running a GT2871R with a screamer pipe and puts down over 300whp, seriously fun to ride in with the bucket seats and harness.
IMG_20171220_223903 by Nikolai Solbakken, on FlickrIG @Hansolbakken
Comment
-
Not much progress lately, been fixing my daily and working on the s13 tidying up a few bits and bobs.
Still knee deep in sanding,grinding and painting. The fun stuff
Fixed my swaybar, got new mounts laying somewhere
IMG_20180106_202714 by Nikolai Solbakken, on Flickr
IMG_20180110_200836 by Nikolai Solbakken, on Flickr
Started cleaning up my diff, decided im not gonna spend time rebuilding the oil cooler for now
IMG_20180124_204843 by Nikolai Solbakken, on Flickr
Might aswell change the fuel filter as the pump is new.
IMG_20180110_212932 by Nikolai Solbakken, on Flickr
IMG_20180110_214119 by Nikolai Solbakken, on Flickr
Finally got my subframe bushings after getting the wrong ones twice, so after a refund I opted for bushings from Driftworks.
IMG_20180116_152521 by Nikolai Solbakken, on Flickr
IMG_20180116_194827 by Nikolai Solbakken, on Flickr
IMG_20180116_211549 by Nikolai Solbakken, on Flickr
Got my hands on another SR20, Its a notchtop from an S14. off course it has spun a bearing but no worries, perfect time to forge it. Will be used in the S13 when the CA blows up.
IMG_20180103_223252 by Nikolai Solbakken, on Flickr
IMG_20180105_222032 by Nikolai Solbakken, on Flickr
IMG_20180103_223302 by Nikolai Solbakken, on Flickr
The next update might be some time away as I want to have bigger updates thats more entertaining and more progress to show for.
This is the more boring part of a project car, its still important but maybe not as entertaining as exterior work or performance upgrades.
Anyways thats it for now, cheersIG @Hansolbakken
Comment
-
Its been a slow month since last update, have mainly been helping others around the shop, also built an exhaust for an Audi S8 V10. Ended up as an straight x pipe with 4 mufflers deleted.
Really made the 5.0 V10 Lambo engine sing, will get an soundclip for you guys in the future.
Still managed to get some work in on the S14 and S13.
The cage is finally done on the S13 driftcar. came out better then expected
IMG_20180211_170748 by Nikolai Solbakken, on Flickr
IMG_20180211_170804 by Nikolai Solbakken, on Flickr
work on the chassis of the S14 has begun, started grinding and applying rust stopper on the exposed area.
IMG_20180129_212954 by Nikolai Solbakken, on Flickr
IMG_20180131_215140 by Nikolai Solbakken, on Flickr
IMG_20180131_214031 by Nikolai Solbakken, on Flickr
Differential got some paint, also recieved the last bushing for the subframe so now as soon as I get new balljoints the whole rear suspension will be assembled.
IMG_20180129_195634 by Nikolai Solbakken, on Flickr
IMG_20180126_125736 by Nikolai Solbakken, on Flickr
IMG_20180211_170718 by Nikolai Solbakken, on Flickr
To finish up I gave my brother my daily Honda Civic EF as he needed something to commute to school with.
So.. I needed a new daily and considering all the parts for S-chassis I have horded and those not needed on the driftcar, I bought an S13 Hatch
IMG_20180219_164926_1 by Nikolai Solbakken, on Flickr
Only picture I have for now
It is in okay condition, mostly suffers from beeing neglected by P.O and I fear this daily will turn into a new project.
Some specs : Ca18det with bolt ons and GT2871R turbo. various stage 2 mods so around 250 HP, first thing I did to it was an VLSD from a S14
Will update you on the new hatch in another update.
That's all folks.IG @Hansolbakken
Comment
-
Did some work the other day.
Sorted the gaskets that came with the S13 daily
IMG_20180302_195656 by Nikolai Solbakken, on Flickr
Then I changed the inner and outer tie rod on the S14 due to one being bent
IMG_20180309_213045 by Nikolai Solbakken, on Flickr
Also got a new gauge setup for it, went with electric ones from Stack LTD. All wired up with sensors installed.
IMG_20180322_220853 by Nikolai Solbakken, on Flickr
IMG_20180322_220819 by Nikolai Solbakken, on Flickr
IMG_20180327_215032 by Nikolai Solbakken, on Flickr
Then I did some maintenance, changed all the belts on the SR and also managed to crack the fan shroud.. so an upgrade is due in time.
IMG_20180328_235453 by Nikolai Solbakken, on Flickr
IMG_20180328_235500 by Nikolai Solbakken, on Flickr
Refreshed the tow point.
IMG_20180328_235800 by Nikolai Solbakken, on Flickr
IMG_20180328_235743 by Nikolai Solbakken, on Flickr
IMG_20180403_202530 by Nikolai Solbakken, on Flickr
Got a new cluster as my S14 suffered from the infamous RPM gauge bounce.
IMG_20180406_214202 by Nikolai Solbakken, on Flickr
IMG_20180406_214227 by Nikolai Solbakken, on Flickr
IMG_20180406_214655 by Nikolai Solbakken, on Flickr
and the underside of the chassis is nearing completion, here its zinc primed and then a yellow rust primer on top, several coats of both
IMG_20180413_193655 by Nikolai Solbakken, on Flickr
IMG_20180411_185518 by Nikolai Solbakken, on Flickr
IMG_20180411_185506 by Nikolai Solbakken, on Flickr
Waiting to get a compressor so the Raptor bedline can be sprayed on. then its finally time to put the car back together.
used some cut up garbage bags for masking the car.
IMG_20180414_231821 by Nikolai Solbakken, on Flickr
IMG_20180414_231834 by Nikolai Solbakken, on Flickr
For the S13 driftcar I got some Driftworks Geomaster innertie rods and oem outers. also cut and welded the knuckles for more angle. will take some more pictures later on.
IMG_20180402_194724 by Nikolai Solbakken, on Flickr
IMG_20180402_181623 by Nikolai Solbakken, on Flickr
Thats unfortuneley all the work thats been put in lately.IG @Hansolbakken
Comment
-
Forgot to update the thread.
finished the last piece of the puzzle with the raptor bedliner, came out great. As this car doesnt see winter and salty roads anymore this might prevent some Nissan corrosion.
IMG_20180420_235330 by Nikolai Solbakken, on Flickr
IMG_20180420_235351 by Nikolai Solbakken, on Flickr
IMG_20180420_235416 by Nikolai Solbakken, on Flickr
IMG_20180420_235357 by Nikolai Solbakken, on Flickr
IMG_20180423_222125 by Nikolai Solbakken, on Flickr
With the fuel tank back in place.
IMG_20180425_212002 by Nikolai Solbakken, on Flickr
Managed to source a new heat shield for the fuel tank.
IMG_20180425_214334 by Nikolai Solbakken, on Flickr
IMG_20180427_224808 by Nikolai Solbakken, on Flickr
IMG_20180501_001523 by Nikolai Solbakken, on Flickr
Updating the Futuras for this season, went with a square look, 17x10 on all 4's. test fitting the rears.
IMG_20180501_001405 by Nikolai Solbakken, on Flickr
IMG_20180501_001425 by Nikolai Solbakken, on Flickr
And the fronts. Keep in mind the chargespeed overfenders are 25mm wider than oem, currently working on widening the oem.
IMG_20180508_213827 by Nikolai Solbakken, on Flickr
IMG_20180508_213844 by Nikolai Solbakken, on Flickr
Waiting on a pair of 3 inch outerlips and new hardware, so ill update when its back on the ground.
On another note, the drift car is nearing completion. Painted the cage and did some minor things, more on this in the next update.
IMG_20180508_213904 by Nikolai Solbakken, on Flickr
Sorry for the quality on the images.IG @Hansolbakken
Comment
Comment