If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hello, how much for the work carving's shipped to the England in the UK?
Instagram: @ask83n
Originally posted by DragginWagon
Always build your car for yourself. and dont tell me you cant afford to.
This thread is a perfect example of taking lemons and making fucking jager bombs!
Brand/model:
Napre Japan Medusa size:
pair 18" x 8j +45et 5x114.3
pair 18" x 9j +47et 5x114.3 description:
Original used, rare wheels, the same as Work Rezax II
Chrome faces has peeling and marks
Lipsbarrels has curb-rash, scratches, bents; NO cracks, welds
Original caps, 2 w/out covers; original gold bolts M7
All 4 Mid disk
Willing to sell just faces
Sold at Facebook to Mike in Cali on his Porsche 911, thx
Brand/model:
six-spoke, center-lock Panasport Racing size:
triple stepped 14"-17"
pair 17" x 9.5j -2et | pcd 114.3 / hub 73.6 / dpd 15.7 / 12 pins (clear BBK)
pair 17" x 10.5j -6et | pcd 114.3 / hub 73.6 / dpd 15.7 / 12 pins description:
very rare, original, forged, restored racing wheels. Four(!) piece wheels.
Center-lock adapters will fit any bolts pattern or can be drilled easily to 4x114.3
I didn't use a sealer, cuz they have a sealing ring
Faces still have some issues, due to design specifics. NO cracks or welds
Read about IMSA Racing and these wheels on Speedhunters:
When I was in my teens, every year I'd look forward to the six hour drive from Vancouver to Oregon, to watch the G.I. Joes Grand Prix at Portland International Raceway. It was an amazing time for sports car racing in America, with factory entries from Jaguar, Nissan, Toyota, and Ford as well as a …
Brand/model:
Rays Nismo LM-GT4 (lmgt4) size:
pair 17" x 7.5j +30et 5x114.3
pair 17" x 8.5j +40et 5x114.3 description:
Original used wheels with tiny curb rash, paint chips, marks; NO cracks, welds, caps
Willing to sell by pairs
Brand/model:
Work Carving Head 40 3pc size:
pair 18" x 8.5j +41et 5x114.3 (1.5"/0.5"/6.5") (lip/face/barrel)
pair 18" x 9.5j +41et 5x114.3 (2.0"/0.5"/7.0")
with 3" Work VS lips specs will be approx
front 18"x9.5j +28et (3.0"/0."/6.5") or 18"x9.5j +16et (3.0"/0."/6.5") or 18"x10j +22et (3.0"/0.5"/6.5")
rear 18" x10j +33et (3.0"/0."/7.0") or 18" x10j +21et (3.0"/0."/7.0") or 18"x10.5j +27et (3.0"/0.5"/7.0") description:
All original used, rare, threepiece wheels
- Oldschool model: faces between lips and barrels
- Chrome faces in good condition, has peeling, marks and one bad scratch
- Lips has curbs, scratches, marks; one lip (9.5") with bents and few huge scratches
- Barrels has curbs, scratches, marks; NO visible bents, one barrel has 2 valve holes
- All lips\barrels has NO cracks or welds
- Bolts needs cleaning, nuts are zinced
- 3 standard valves and one long
- Original 5(!) rare center caps with some defects
- I have 4 extra original Work VS brushed lips 3" with light bents and curbs; NO cracks or welds.
They needs some works to fit Carving's. Can make them perfect and fit for extra $200
All issues are shown on pics
Comment