Announcement

Collapse
No announcement yet.

What's is needed to run these wheels?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What's is needed to run these wheels?

    Hey everybody, I want to fit my CCW classics and use a 10mm or 15mm spacer on my 1985 Mercedes 190E but I don't know what is necessary in order for me to do so.

    Wheel specs are:
    70.3 centerbore
    5x114.3 pattern

    Vehicle specs are:
    66.6 hub bore?
    12x1.5x40 stock wheel bolt length


    I know I need 12x1.5 wobble bolts but what length? As for spacers should they be hubcentric to prevent vibration and do they make spacers that fit 66.6 hub bore and get wider to 70.3 at the end? Any input is much appreciated.

  • #2
    If you are trying to dial in the spaces size - use stacked washers to "make" the spacer. That way you will know/see what spacers you need. Will help with lug bolt lengths too.


    OZ, MSW, ABT, Carlsson, etc 10 point bolt tools info

    Comment


    • #3
      Do they make spacers that fit a 66.6 hub and a 70.3 centerbore?
      Last edited by zoo; 01-02-2016, 08:26 AM.

      Comment


      • #4
        I guess I'll just buy some hub centric rings

        Comment


        • #5
          Originally posted by Chris_tA_4 View Post
          Do they make spacers that fit a 66.6 hub and a 70.3 centerbore?
          You can get those made, try Adaptec.


          OZ, MSW, ABT, Carlsson, etc 10 point bolt tools info

          Comment


          • #6
            If you want a 15mm, just call Adaptec Speedware and get some 15mm adapters and they can do 66.6 hub side and 70.3 wheel side.
            Chris Lane - fifteen52 - Join us on Facebook
            chris@fifteen52.com 813.505.7910 - direct : 213.373.1552
            RML | 52 Wheels | KW | ST | B&G | Newing-Alpil | C2 | Air-Lift

            Comment


            • #7
              Thanks brother!

              Comment


              • #8
                What's the offset and size of the wheels.
                http://www.r3vlimited.com/board/imag...es/cruisin.gif

                Comment

                Working...
                X