Results 1 to 4 of 4

Thread: Choosing spacers

  1. #1
    Join Date
    May 2015
    Posts
    2

    Default Choosing spacers

    How should I go about choosing spacers? Pick a size that I think will look good then roll/pull fenders to fit after.... Or? How have you done it before?

  2. #2
    Join Date
    Sep 2014
    Posts
    7

    Default

    measure from the tire to the fender and order the size spacer in millimeters. add more millimeters if u plan on camber and fender pulling more.

  3. #3
    Join Date
    Aug 2010
    Location
    Malinwa
    Posts
    22,867

    Default

    First you measure

    Then buy bigger lips and/or barrels

  4. #4
    Join Date
    Oct 2017
    Posts
    9

    Default

    Yeah always measure first. I like to jack up the opposite corner of the car to compress the suspension until there would or could be some rub on the wheel I'm measuring. Then I'll measure from the tire or rim to the fender and see what I can get away with. Add a couple MM if you want to roll the fenders.
    1999 W202 Mercedes C280 on H&R springs and custom Fifteen52 Tarmacs

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •