Page 1 of 12 12311 ... LastLast
Results 1 to 25 of 285

Thread: 100mm 1/11 Car Register.

  1. #1
    Join Date
    Aug 2009
    Location
    MEL Australia
    Posts
    23,230

    Default 100mm 1/11 Car Register.

    So after a bit of thinking and some discussions with Tranz and a couple other people, I feel like we need some form of screening process for the cars that are entering under the Stanceworks banner. I have had a discussion with Robin and have worked out we have roughly 20 spots, give or take, for us as a colaborative group with House of Stance. That number may be pushed to 25 IF we work out which cars are actually entering.

    Back in 2012 we drove interstate for the first Showcased, where we similarly colaborated with House of Stance, without really knowing it. Both Ray and Tony entered with us, and Chook was right across the road, where we took out the #1 car club trophy, and Chook took out best stance. That was a killer weekend, there were many good memories made and friendships formed. We also showed up with some of the best (in my own opinion) fitted cars at the time.

    Fast forward to now. In the current "scene" there are many people and "crews" that are trying to pull off the fitted look that we all love. Some of them are actually doing a fantastic job of it and here lies my thinking that at 100mm, since we are colaborating with HoS, we have to bring 100% to the show. There really isnt any room for any wheel gap, or lack of offset. If the wheels are tucking, the rails have to be touching. If the wheels are poking, there needs to be adequate camber dialed in for that jaw dropping look.

    Ill give you an example.



    As cool as the civic was at this point in its life, Turbocharged, bagged, fun, it never recieved as much attention as it did when it looked like this:





    Another example I will use is Foffs R32 golf. Foff knows I will always have love for him.



    As good as this looks, It doesn't jump out anywhere near as much as the LM's.


    So basically, there is going to be some criteria that you will need to meet to enter as a part of out colaboration. I understand that people are building their cars for this and not everything is there yet, so pictures cant be supplied. At the same time if people are trying to get their cars ready, but dont hold the same vision as what we need, then there shouldnt be a real rush on getting parts if it isnt going to make the cut. If you're reading any of this and thinking "Ox and SW can go fuck themselves" then have a cup of cement, harden the fuck up, make like a tree and leave.


    Post up a picture of your car currently, and what it is that you are buying/planning/doing to it to make the cut. As you progress, Update us in here. Some cars are already close to being ready. As the visions become realities a list will be formed untill we have filled our spaces.

    This thread is purely for the SW cars entering, as HoS have the same high expectations and all cars that come under their banner will meet said expectations.
    Quote Originally Posted by anth View Post
    Lucky they didn't come into your house and disrespect your whole family.

  2. #2
    Join Date
    Feb 2010
    Location
    Melbourne - Australia
    Posts
    4,573

    Default

    Most if not all should know what my car looks like.
    im sure it makes the cut. =P
    Last edited by TRaNz; 08-09-2015 at 09:02 AM. Reason: .
    S I N G L E | W O R K S - Loneliness is a Lifestyle

  3. #3
    Join Date
    Jun 2011
    Location
    Melbourne
    Posts
    555

    Default

    you know my car, you know my style and you know what i did with the jazz and im bringing the same game with the audi.

    that said ox and others if i dont meet the cut let me know.

    ultra sport front bumper coming in. new front splitter. side relak skirts. spacers for CCW. mayb some pipes out the back. will see.

  4. #4
    Join Date
    Aug 2013
    Location
    adelaide
    Posts
    169

    Default

    my car atm build still in progress
    [/URL][/IMG]
    hoping to have trd sides/ front lip and splitter added before 100mm, heading to syd this week to pick up my new rims (not quite sure on the final fitment yet) so will have heaps of pic from Fitted Friday
    daily driven sti IG: skytup

  5. #5
    Join Date
    Oct 2010
    Location
    SE melbs
    Posts
    488

    Default

    I haven't had the tyres fitted up to the bug yet but it will be sitting on the ground with the front mounted RS'

    16x4" fronts and 16x8" rear.




    Would love to sit it in with you boys
    [QUOTE=Oxer;1593769]I Love VW's[/QUOTE]

  6. #6
    Join Date
    Dec 2013
    Posts
    969

    Default

    nvm i ceebs entering will come for the support
    Last edited by andrewn; 08-10-2015 at 06:09 AM.

  7. #7
    Join Date
    Feb 2012
    Location
    Canbrah, Australia
    Posts
    990

    Default

    I'll see how numbers go, going to Japan in January so it's probably a good idea to save some money. I still want to make the trip though! And I did just get some parts I've been waiting for 6 months for haha.
    Quote Originally Posted by TRaNz View Post
    We ride homos together, we die homos together. Homos 4 Lyfe. <3

  8. #8
    Join Date
    Aug 2010
    Location
    Melbourne, Australia
    Posts
    1,698

    Default

    My touring. Most of you know it. I'm keen to join the fun.


    Have sold those wheels and my new wheels (arguably more 'stance' friendly lol) will be here in 6 weeks.

    Also did this today:
    Quote Originally Posted by TRaNz View Post
    omg man...naaaaahhhhhh...dafuq bro...nah thats crossing the line. youre fucked bengfacebengcunt.

  9. #9
    Join Date
    Sep 2009
    Location
    victoria, australia
    Posts
    1,350

    Default

    felony kit moulded into bodywork, no rivet on job, lower rear, ~same height front



    meaty flush fitment on my simmons



    new paint



    im not building the car for 100mm, it just happens to hopefully coincide that the bodywork will be done in time. its not slammed, fitment will be as flush as i can get it without destroying the fenders.

    if that doesnt meet your criteria, cool. i'll continue to drive the fuck out of it when i get it back regardless

  10. #10

    Default

    I`ll have a look at u kids
    be fivepointfive

  11. #11

    Default

    dunno if my daily is worthy
    plan to have some new 18" 3 piece wheels built
    paint tidied up
    side skirts painted and fitted.
    maybe front camber tops if I can find some to suit
    notch the front right and lift the engine if I man up

    bags.wheels.done
    standard mk4 wanker


    Sarcasm is easily calculated on vortex dude. Take 4 parts GLI lip and divide by BBS RS. If you are left with a remainder, subtract it from omgmoarlow. Profit.

  12. #12
    Join Date
    Apr 2013
    Location
    Melbourne
    Posts
    577

    Default

    Sup lads...ford has been outta the game after smashing a gearbox due to driving around slammed and fitted 24/7 for almost 2 years. Getting it back into the swing for summer & 100mm should kick it off nicely. Doing some well overdue modifications and repairs to get it where I'd like it...

    - respray for rear bar + scratched side skirt
    - burnt rear guard lips paint touched up professionally
    - cf rear diffuser
    - rs hood vents
    - full refurb of panasports incl lip gutter repair and polish + faces resprayed in a color not yet decided but will be sweet if it turns out the way I picture it in my mind!
    - full cut and polish exterior
    - going lower than ever before also of course..here goes another $2k on smashing a gearbox hahahaha

    ....thats about all I can think of for now

    these are obviously old pic's but will update with freshies once shes back from the panel shop before the end of the working week as well as the return of the g7's from wheel solutions







    Last edited by danielsahhhn; 08-10-2015 at 08:40 AM.
    Like a glove

  13. #13
    Join Date
    Dec 2013
    Location
    Melbourne, Aus
    Posts
    74

    Default

    Have been busting balls 8 days a week after work to get my bad boy ready for 100mm and GAD too. Been putting in stupid amounts of time. Fresh paint, finishing touches on the turbo, new uprated gearbox to be finished, bbs rs, recaros etc etc etc and hopefully air ride in time!



    Last edited by georgeMK1; 08-10-2015 at 08:39 AM.

  14. #14

    Default

    If the silvia has an engine in it and running ill bring it along. Not sure when 100mm is on and i dont know when im gettin my engine back


  15. #15

    Default



    I'm down!
    E85 is love, E85 is life.

  16. #16
    Join Date
    Dec 2011
    Location
    Victoria, Australia
    Posts
    930

    Default



    Im definitely keen, wind down the coils a touch for good times. Aye.
    - = [ M . I . A | c r e w ] = -

  17. #17
    Join Date
    Apr 2012
    Location
    Adelaide, South Australia
    Posts
    369

    Default

    Paint your hood for 100mm bruh!

    I have some plans for 100mm, will try get a picture through soon

  18. #18
    Join Date
    Aug 2009
    Location
    MEL Australia
    Posts
    23,230

    Default

    what the civic was going to look like....



    Quote Originally Posted by anth View Post
    Lucky they didn't come into your house and disrespect your whole family.

  19. #19
    Join Date
    Apr 2014
    Location
    Canberra, Australia
    Posts
    26

    Default

    I am aware the frankensil may not meet the required standards, no hard feelings if that is the case.

    Current wheels are 8's and 9's, for 100mm will have the 9's and 10's version of the same wheel on the car.

    Gonna mess with fitment in the next few days and maybe see if i cant lower it a little more. Will attempt maximum fitMUNT possible and see what happens.

    Will update with results but for now here is a few photos from a mate at HWH this year

    424 by Tim Knights, on Flickr

    385 by Tim Knights, on Flickr

    378 by Tim Knights, on Flickr

    210 by Tim Knights, on Flickr

    415 by Tim Knights, on Flickr

    275 by Tim Knights, on Flickr



    Sorry for the overshare of photos, i may have gotten carried away
    Last edited by Dummett22; 08-12-2015 at 07:00 AM.

  20. #20
    Join Date
    Aug 2010
    Location
    Melbourne, Australia
    Posts
    1,698

    Default

    how do you have VIC club reg? lol Looks great btw
    Quote Originally Posted by TRaNz View Post
    omg man...naaaaahhhhhh...dafuq bro...nah thats crossing the line. youre fucked bengfacebengcunt.

  21. #21
    Join Date
    Jan 2012
    Location
    Los Angeles
    Posts
    5,777

    Default

    ^ Would be through Stu no doubt lel
    IG: @sebastienaudeon
    1974 Porsche 911S

    Quote Originally Posted by TRaNz View Post
    *pats Sebs head*
    there there.
    keep calm, go mash your face on a car window.

  22. #22
    Join Date
    Oct 2010
    Location
    SE melbs
    Posts
    488

    Default

    hehehe
    [QUOTE=Oxer;1593769]I Love VW's[/QUOTE]

  23. #23
    Join Date
    Sep 2009
    Location
    ausjailia
    Posts
    11,368

    Default

    how old for club reg?

  24. #24
    Join Date
    Jul 2012
    Location
    Cenny Coast
    Posts
    318

    Default

    25years no?

  25. #25
    Join Date
    Apr 2014
    Location
    Canberra, Australia
    Posts
    26

    Default

    Quote Originally Posted by USDMem1 View Post
    how do you have VIC club reg? lol Looks great btw
    Yeah club rego is stu although since rego goes off what state the car is "stored" in i could have kept it in my name. Any advice on fitment? im really not sure what direction to head in atm

    Quote Originally Posted by Lukey View Post
    how old for club reg?
    25 years is correct although I believe regoing as a replica of a model that does satisfy the 25 year rule is also a route

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •