Tweet
FS: CCW Classics 17x9/10 White Race/Swiss
Selling my beloved wheels, time to build and try something else.
CCW Classics Race edition, with Swiss holes, Faces have been powdercoated white, and lips are polished. Bolts have been painted gold. I am currently running them on my M3, so tires will be dismounted, and lips will be gone over with a hand polish upon sale. These wheels are incredibly light, actually lighter than my factory "Ltw" wheels. No bends or cracks. only two flaws i can think of: One lip used to be bent, but i had it straightened at a shop so the lip has a slight tweak in it where it didn't come out 100%. Second would be a small area of curb rash i tried to sand out, but some was left over (on the outer edge of the lip, only seen with stretched tires)
Wheels were originally 17x10 et42 square, but because the fronts were rubbing the coilover too bad i replaced two 8" barrels with brand new 7"ones from CCW. You will need a slight spacer all the way around to clear the body (minimum of 4mm) so these wheels can either be setup for track, or fitment depending on the spacers you use! i went for a fitment/track setup with 12mm spacers in the rear, and 10mm front.
Specs:
17x10 et42 2" lip 8" barrel
17x9 et29.3 2" lip 7" barrel
Price:SOLDDDD
Pics:
CCW Classics Race edition, with Swiss holes, Faces have been powdercoated white, and lips are polished. Bolts have been painted gold. I am currently running them on my M3, so tires will be dismounted, and lips will be gone over with a hand polish upon sale. These wheels are incredibly light, actually lighter than my factory "Ltw" wheels. No bends or cracks. only two flaws i can think of: One lip used to be bent, but i had it straightened at a shop so the lip has a slight tweak in it where it didn't come out 100%. Second would be a small area of curb rash i tried to sand out, but some was left over (on the outer edge of the lip, only seen with stretched tires)
Wheels were originally 17x10 et42 square, but because the fronts were rubbing the coilover too bad i replaced two 8" barrels with brand new 7"ones from CCW. You will need a slight spacer all the way around to clear the body (minimum of 4mm) so these wheels can either be setup for track, or fitment depending on the spacers you use! i went for a fitment/track setup with 12mm spacers in the rear, and 10mm front.
Specs:
17x10 et42 2" lip 8" barrel
17x9 et29.3 2" lip 7" barrel
Price:SOLDDDD
Pics:
Comment