++**"Help me identify this wheel!" Thread.**++

[s4cr]

What are these?



all i know is that they're 5x98, 58.0mm centerbore, r17

[airkooled]

still dont know what these are

[EdwardSTA]

Hi guys, Any idea on what wheels these are?

[340i]

Hi
I'm looking at getting these

they're advertised as Schnitzer 3 peice, and i thought they were type 1's, but all the pics on the net of type 1's they have 35 bolts and these wheels have 32... fake, or earlier, or a different model? reckon i could get different lips for them?

cheers

[Rob Daddy]

What are these?



all i know is that they're 5x98, 58.0mm centerbore, r17

those look like Fittipaldi 500s
old school wheel from like 95

[Rob Daddy]

4x100, 15x7, offset unknown. anyone know what these are?

those look like OZ Executive from like 92

or replicas of OZ Executive

[Rob Daddy]

some one help! a buddy of mine wants to pick these up but has no idea what they are???? thanks fellas

That is a KMC wheel
check their site i think its still being made

[Costa]

What are these?



all i know is that they're 5x98, 58.0mm centerbore, r17

5x98 is the fittment of alfa romeo(156,147)

[mikee]

I know these are schmidt wheels but what are they called?

[iller]

anyone know what these are? thnx

[cb7resurrector]

well heres a set of wheels i got. i have no friken clue what they are. they are 16s. around 9.5/10 inches wide. unsure of the offset. im not sure how to calculate it. they also have two 4-lug patterns. but they arent universal. both patterns fit a 4x114.3 pattern? my friend thinks they could be a set of truck rims? like an 8 lug chevy or something because of how wide they are.





i can get better pics if need be

[EThirtySicks]

ATS Scala

Thanks man! Stupid wheels I need them off my car ASAP

[cb7resurrector]

any0ne??

[UnitedWeStance...]

well heres a set of wheels i got. i have no friken clue what they are. they are 16s. around 9.5/10 inches wide. unsure of the offset. im not sure how to calculate it. they also have two 4-lug patterns. but they arent universal. both patterns fit a 4x114.3 pattern? my friend thinks they could be a set of truck rims? like an 8 lug chevy or something because of how wide they are.





i can get better pics if need be

They look like old school cragar wheels. And I am not sure if they are truck wheels, they look like a dual bolt pattern wheel. Hope this helps!

[Russelllaviolette]

They're 15x7 with a +25 offset. Not sure of the PCD, though I suspect 4x100 or 4x114.3. Date stamped on wheel is "85".

It appears that the RA's that come on late 80's Jetta's were 15x6.5.

So my question is...what car did these come in?

Help is appreciated.

[16v_hor]

Here's yet another set that i need ID'd. These aren't BBS RF's apparently,but they ARE BBS rims. Any help?




4x100 14x6.5 +33 BBS ?'s

& where could i get centercaps?

These are BBS RD's, which are the one piece versions of the RF's. They come in 15's as well as 14's, so be careful when you're on the hunt for center caps. Also make sure you get RD ones as they snap in (like RM's) unlike the RF caps that screw in (like RS'). As far as finding them, good luck. There weren't alot of these wheels made to begin with, let alone in 14's. Best bet is to hunt ebay and as many European automotive forums as you can. Praying every night might not hurt either

[16v_hor]

They're 15x7 with a +25 offset. Not sure of the PCD, though I suspect 4x100 or 4x114.3. Date stamped on wheel is "85".

It appears that the RA's that come on late 80's Jetta's were 15x6.5.

So my question is...what car did these come in?

Help is appreciated.

I was never sure exactly what these came on, but I'm pretty sure they were for European Mk2's or E30's. Given the offset, I would tend to lean more toward the BMW, as their wheels usually run in the low to mid 20's, and VW wheels don't really get much under mid 30's. Regardless, I know they were a European wheel, and never offered in the US as an oem unit.

[Russelllaviolette]

I was never sure exactly what these came on, but I'm pretty sure they were for European Mk2's or E30's. Given the offset, I would tend to lean more toward the BMW, as their wheels usually run in the low to mid 20's, and VW wheels don't really get much under mid 30's. Regardless, I know they were a European wheel, and never offered in the US as an oem unit.

Interesting. The seller of the rims noted that they came on his mid 80's RX7, but haven't been able to confirm this. Thank you for the help thus far.

[Costa]

The seller of the rims said to me that these are OEM and they came on 7 series bmw...
17" 8,5J ET13 and they are not split rims

What style are they?Or what rims are these?

[Morbid]

plz?<3

[saloon]

OK, got one for you guys...

BBS 16x8.5 ~ ET13 ~ Square Set ~ 5x120 3" Lip... Guy had them on a E38 and they did not come with centers. The only other info on the wheels are "394" KBA41762



I'm about to refinish them and polish the lips, but I would like to know what they are. Maybe try and find some centers.

Please let me know if you guys know anything!

Thanks,
Saloon

[s4cr]

13x8 et13 4x100


anybody recognize these?

[biggieB15]

does some one know what model of Lerhmeister is this is 18x11 -13???????

[saloon]

How about these... Any ideas......



Only info I know is they are 7.5x16 and I believe they are made in Italy.

[Neb]

13x8 et13 4x100


anybody recognize these?

Those look like HTN's

Hi guys, Any idea on what wheels these are?

Maybe HRE 504's? in a 4-lug? My buddy has them in 5 bolt on his raddo..