Reverse Mounted Enkei Meshies

[AMGwheelwhore]

Up for sale are my reverse mounted Enkei mesh wheels, the lips have been fully polished and look great. Rears a real deep dish thanks to the reverse mount. They are fake splits and the barrels are welded, but the bolts can still be removed. $700 SHIPPED

Specs: 15x7 ET -13
15x8.5 ET -32

PCD: 5x120.65 (Chevy/Corvette)





Sorry there a bit dirty from polishing still

[wheelex]

wink

[DDM]

Shit, I'd be all over these, but the rears are just too extreme, I'd never be able to fit them

[DDM]

Unless they can be redrilled to 4x100...
Do you think that's possible on these?

[AMGwheelwhore]

Unless they can be redrilled to 4x100...
Do you think that's possible on these?

Im not really sure.. Il post some pics of the backside of them when I get off work. But shipping the Netherlands will prob cost a fortune.

[Francois Dillinger]

welded splits =/= fake splits. these are dope, however i doubt they can be redrilled to 4x100 due to the face style. you need to do a 5 lug swap

[DDM]

welded splits =/= fake splits. these are dope, however i doubt they can be redrilled to 4x100 due to the face style. you need to do a 5 lug swap

With a lot of fab work, I could get 5x120's on there, but it still wouldn't match exactly.
Adapters would probably be way too thick, I believe the thinnest are about 20mm, which would make them -52... -32 is already gonna be reaaaaly tight on an e21, I really can't use those extra 20mms...

[AMGwheelwhore]

With a lot of fab work, I could get 5x120's on there, but it still wouldn't match exactly.
Adapters would probably be way too thick, I believe the thinnest are about 20mm, which would make them -52... -32 is already gonna be reaaaaly tight on an e21, I really can't use those extra 20mms...

The best bet would probably be to go the adapter route, 4x100 to 5x120.7 is a cheaper alternative and fairly common set up on alot of cars.

[DDM]

Yeah, I figured that, but I can't really use another 20 mm on these already super agressive wheels...
I'm gonna think about it, but GLWS!

[TheNeek]

Fill and Drill

[AMGwheelwhore]

Up

[AMGwheelwhore]

Will trade for staggered Salad Shooters or Porsche wheels

[AMGwheelwhore]

ttt

[DDM]

Could you get a pic from the rear? Maybe I could shave some off that and get really thin adapters...
Also, could you look into what shipping might cost?

[AMGwheelwhore]

Could you get a pic from the rear? Maybe I could shave some off that and get really thin adapters...
Also, could you look into what shipping might cost?

Il take a pic later on this evening, and I have no idea what that might cost, if your serious PM me your info and il see what I can do. It probably won't be cheap though...