Page 1 of 5 123 ... LastLast
Results 1 to 25 of 114

Thread: Adaptec Speedware - Dedicated to Fitment

  1. #1
    Join Date
    Aug 2011
    Posts
    47

    Default Adaptec Speedware - Dedicated to Fitment

    Welcome to Adaptec Speedware!

    We're here to provide you with the finest spacers, adapters, and hub rings you can find.
    We're here to answer any questions regarding fitment, poke, flush, and how you should go about achieving the stance you've been day/night dreaming about.

    Check out this article on our facility and manufacturing process.

    We've been in the business since 1996, and it's hard to find something we can't build, so no matter how weird you think it is, we can build it.


    The bottom line is simple - We're glad you're here, and we look forward to helping you get dialed.










    Last edited by jr@adaptecspeedware; 08-31-2011 at 01:22 PM.

  2. #2
    Join Date
    Mar 2010
    Posts
    934

    Default

    Sweet! Welcome Jr!
    My first JDM project after decades of European cars!

  3. #3
    Join Date
    Aug 2011
    Posts
    47

    Default

    Thanks Jeremy! Can't wait till you get your new stuff.. and then get bored in 3 months and start the cycle again haha.. Big ups to you for always trying something new!

  4. #4
    Join Date
    Mar 2010
    Posts
    934

    Default

    Quote Originally Posted by jr@adaptecspeedware View Post
    Thanks Jeremy! Can't wait till you get your new stuff.. and then get bored in 3 months and start the cycle again haha.. Big ups to you for always trying something new!
    You know me too well
    My first JDM project after decades of European cars!

  5. #5
    Join Date
    Aug 2011
    Posts
    47

    Default



    A little holiday weekend bump from a Canadian car.. thanks Bojan!

  6. #6
    bradp@adaptecspeedware is offline STANCE|WORKS Sponsor -SPONSOR-
    StanceWorks Addicted
    Join Date
    Aug 2011
    Posts
    594

    Default

    up top for H20

  7. #7
    Join Date
    Jun 2011
    Location
    Central California
    Posts
    361

    Default

    how much for two sets of 4x100 to 5x130 adapters? two 25mm and two 35mm?

  8. #8
    Join Date
    Aug 2011
    Posts
    47

    Default

    Quote Originally Posted by drosas View Post
    how much for two sets of 4x100 to 5x130 adapters? two 25mm and two 35mm?
    PM sent!

  9. #9
    Join Date
    Mar 2009
    Location
    Mill Creek WA
    Posts
    3,468

    Default

    odd request... single spacer with hub ring built in?

    Mr. Belvedere

    I want to buy your single 4x100 Ronal Racing center

  10. #10
    Join Date
    Aug 2011
    Posts
    47

    Default

    Quote Originally Posted by TheNeek View Post
    odd request... single spacer with hub ring built in?
    Nope! Not odd at all. What size do you need?

  11. #11
    Join Date
    Mar 2009
    Location
    Mill Creek WA
    Posts
    3,468

    Default

    Quote Originally Posted by jr@adaptecspeedware View Post
    Nope! Not odd at all. What size do you need?
    4x100, 3mm thk, I need to measure the cb of the odd wheel. I'll make contact when the car is up in the air again.

    Mr. Belvedere

    I want to buy your single 4x100 Ronal Racing center

  12. #12
    Join Date
    Aug 2011
    Posts
    47

    Default

    Quote Originally Posted by TheNeek View Post
    4x100, 3mm thk, I need to measure the cb of the odd wheel. I'll make contact when the car is up in the air again.
    Sweet, sounds good, just let us know.

  13. #13
    bradp@adaptecspeedware is offline STANCE|WORKS Sponsor -SPONSOR-
    StanceWorks Addicted
    Join Date
    Aug 2011
    Posts
    594

    Default


  14. #14
    Join Date
    Aug 2011
    Posts
    47

    Default

    Hope you're all at H20i right now!

  15. #15
    Join Date
    Aug 2009
    Location
    Seattle
    Posts
    464

    Default

    PM'd ya
    *~* Yamaguchi-gumi Syndicate Member #59,005 *~*
    // Bippu-Car \\

  16. #16
    Join Date
    Aug 2011
    Posts
    47

    Default

    Replied!

  17. #17
    Join Date
    Sep 2011
    Posts
    41

    Default

    Pm'd

  18. #18
    Join Date
    Aug 2011
    Posts
    47

    Default

    PM returned!

  19. #19
    Join Date
    Mar 2011
    Location
    Pittsburgh, PA
    Posts
    545

    Default

    PM sent!
    Balls Deep Squad.

  20. #20
    Join Date
    Aug 2011
    Location
    England, Lincolnshire
    Posts
    67

    Default

    hi im after some 4x100 to 5x112 adapters 2 18mm and 2 30mm, with custom hub bore and wheel bore, could you inbox me please ?
    heres a picture of what im after

  21. #21
    Join Date
    Mar 2011
    Location
    302
    Posts
    397

    Default

    PM sent about some spacers!

  22. #22
    bradp@adaptecspeedware is offline STANCE|WORKS Sponsor -SPONSOR-
    StanceWorks Addicted
    Join Date
    Aug 2011
    Posts
    594

    Default

    pm me or send email to sales@adaptecspeedware.com for the fastest response

  23. #23
    bradp@adaptecspeedware is offline STANCE|WORKS Sponsor -SPONSOR-
    StanceWorks Addicted
    Join Date
    Aug 2011
    Posts
    594

    Default

    Bump this up from the dead. Back in full swing. Our standard 7 to 10 day build time is in effect for custom orders with a lot of popular spacer thicknesses in stock. email us at sales@adaptecspeedware.com for all your fitment needs. let us know you're from Stanceworks and get a 15% discount.

  24. #24
    Join Date
    Feb 2010
    Location
    Gouda, the Netherlands
    Posts
    739

    Default

    So guys, what's the thinnest adapter you could make? I'm looking to bolt up some 5x120.7 wheels to my 4x100 car. Thanks!

  25. #25
    bradp@adaptecspeedware is offline STANCE|WORKS Sponsor -SPONSOR-
    StanceWorks Addicted
    Join Date
    Aug 2011
    Posts
    594

    Default

    Quote Originally Posted by DDM View Post
    So guys, what's the thinnest adapter you could make? I'm looking to bolt up some 5x120.7 wheels to my 4x100 car. Thanks!
    in those bolt patterns, 18mm. most others 15mm.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •