Infinitewerks LS 3 Piece w/Reverse Lips - 20x10+18 | 20x10.5+28 – $3500
E-mail: pharrlower@gmail.com - tell me its from the ad here, hardly ever on stanceworks
Located in California - East Bay
Prefer local pickup but will ship
Installed in my 2010 Genesis Sedan
Daily driven for almost 5 years
Long time poster and Moderator over at Genesisowners
Infinitewerks LS 3 Piece w/Reverse Lips
---------5x114.3 Bolt Pattern
---------Front - 20x10+18 | 6” Inner Barrel – 4” Lip
---------Rear - 20x10.5+28 | 6.5” Inner Barrel – 4” Lip
---------Liquid Bronze Face
---------Brushed Smoked Lead Lips and Centers w/logo Machined
---------24k Gold Hardware
Work Wheels V07C Valvestems
Yokohama S.drive – 245/35/20 | Front ~0.23" Tread Depth and Rear ~0.26" Tread Depth
Parting out my car and am also selling my wheels. Custom ordered from Infinitewerks back in May of 2015 with specs listed above. One of the first sets on the East Coast and were called LS01's, now they are just LS. Two valvestems per wheel, neither seen from the outside. Have to be filled from the inner barrel side. Plenty of tread left on all four tires. Been on and off the car for the past four years. Tiny imperfections on all four wheels with a small scrape on Driver Rear lip. Measured my pinky finger and placed next to the imperfections for scale. See pics below and in album for reference.
Prefer local pickup if possible. Located in the Bay Areas. Asking $3500. Willing it to ship on buyers behalf for additional cost.
Link to Album
Pics
Driver Front
Has an area of light scratches about 2" in diameter on the lip near the face. Not sure what caused this.
Passenger Front – Typical imperfection in 2nd pic
Driver Rear
Driver Rear Worst Spot
Passenger Rear
Work Valvestems
E-mail: pharrlower@gmail.com - tell me its from the ad here, hardly ever on stanceworks
Located in California - East Bay
Prefer local pickup but will ship
Installed in my 2010 Genesis Sedan
Daily driven for almost 5 years
Long time poster and Moderator over at Genesisowners
Infinitewerks LS 3 Piece w/Reverse Lips
---------5x114.3 Bolt Pattern
---------Front - 20x10+18 | 6” Inner Barrel – 4” Lip
---------Rear - 20x10.5+28 | 6.5” Inner Barrel – 4” Lip
---------Liquid Bronze Face
---------Brushed Smoked Lead Lips and Centers w/logo Machined
---------24k Gold Hardware
Work Wheels V07C Valvestems
Yokohama S.drive – 245/35/20 | Front ~0.23" Tread Depth and Rear ~0.26" Tread Depth
Parting out my car and am also selling my wheels. Custom ordered from Infinitewerks back in May of 2015 with specs listed above. One of the first sets on the East Coast and were called LS01's, now they are just LS. Two valvestems per wheel, neither seen from the outside. Have to be filled from the inner barrel side. Plenty of tread left on all four tires. Been on and off the car for the past four years. Tiny imperfections on all four wheels with a small scrape on Driver Rear lip. Measured my pinky finger and placed next to the imperfections for scale. See pics below and in album for reference.
Prefer local pickup if possible. Located in the Bay Areas. Asking $3500. Willing it to ship on buyers behalf for additional cost.
Link to Album
Pics
Driver Front
Has an area of light scratches about 2" in diameter on the lip near the face. Not sure what caused this.
Passenger Front – Typical imperfection in 2nd pic
Driver Rear
Driver Rear Worst Spot
Passenger Rear
Work Valvestems
Comment