Results 1 to 2 of 2

Thread: FS: Infinitewerks LS 3 Piece w/Reverse Lips - 20x10+18 | 20x10.5+28 $3500

  1. #1

    Default FS: Infinitewerks LS 3 Piece w/Reverse Lips - 20x10+18 | 20x10.5+28 $3500

    Infinitewerks LS 3 Piece w/Reverse Lips - 20x10+18 | 20x10.5+28 – $3500

    E-mail: pharrlower@gmail.com - tell me its from the ad here, hardly ever on stanceworks
    Located in California - East Bay
    Prefer local pickup but will ship
    Installed in my 2010 Genesis Sedan
    Daily driven for almost 5 years
    Long time poster and Moderator over at Genesisowners

    Infinitewerks LS 3 Piece w/Reverse Lips
    ---------5x114.3 Bolt Pattern
    ---------Front - 20x10+18 | 6” Inner Barrel – 4” Lip
    ---------Rear - 20x10.5+28 | 6.5” Inner Barrel – 4” Lip
    ---------Liquid Bronze Face
    ---------Brushed Smoked Lead Lips and Centers w/logo Machined
    ---------24k Gold Hardware
    Work Wheels V07C Valvestems
    Yokohama S.drive – 245/35/20 | Front ~0.23" Tread Depth and Rear ~0.26" Tread Depth

    Parting out my car and am also selling my wheels. Custom ordered from Infinitewerks back in May of 2015 with specs listed above. One of the first sets on the East Coast and were called LS01's, now they are just LS. Two valvestems per wheel, neither seen from the outside. Have to be filled from the inner barrel side. Plenty of tread left on all four tires. Been on and off the car for the past four years. Tiny imperfections on all four wheels with a small scrape on Driver Rear lip. Measured my pinky finger and placed next to the imperfections for scale. See pics below and in album for reference.

    Prefer local pickup if possible. Located in the Bay Areas. Asking $3500. Willing it to ship on buyers behalf for additional cost.

    Link to Album
    https://flic.kr/s/aHsmDZ1koP

    Pics




    Driver Front





    Has an area of light scratches about 2" in diameter on the lip near the face. Not sure what caused this.


    Passenger Front – Typical imperfection in 2nd pic




    Driver Rear




    Driver Rear Worst Spot


    Passenger Rear





    Work Valvestems

    Last edited by xiaphin; 06-08-2019 at 10:26 PM. Reason: added valvestems, added bolt pattern

  2. #2

    Default

    Posting some pics with my username and date eventhough I have same username on all the car forums - here, My350Z, G35Driver, VIPStyleCars, Zilvia, GenesisOwners, etc




Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •