meme_caddy_v2.0.jpg
^^ a photoshop of ideally what i want the car to look like. the actual car is more of a creme color with a brown roof, but i decided to keep the original fabric and body color as i dont want to veer to far from the heart of the car as it were.
so, my grandmother passed away this april, and her and my grandfather had a 1996 cadillac deville. It was their sunday cruiser type car and i have a lot of happy memories spending time with them in it. lots of lemon drops were given to me on the way to the movies in that car. It was left to me when my grandmother passed away. I plan on giving the car a once over in terms of fixing some of the trim that has deteriorated over the years, the plastic painted chrome trim needs replacing, and i plan to put the car on air ride with some classic wheels & white walls, improve the sound system with a complete speaker & headunit replacement and get a wooden plaque made on the inside of the trunk in memory of them.
Current Proposed Main Part List -
Air Lift 3P Management (Plans to 3D print a mount for the controller on the dash, or hidden within the dash.)
Air Lift Pancake Tank (hidden in the trunk)
Air House 2
Air Aero Power Sport
a plethora of air fittings to make the system work.
the plan is to run the bags on stock struts because well...they are original, so they probably need replacing, so i can determine if i need custom struts after running the bags on stock struts. the plan if the drop is good, is to go with an Air Ditcher strut set. I dont really plan on driving the car in a lowered out state as I live in NH, and this car is a boat, so im not concerned with damaging the struts due to travel while lowered. it will pretty much ride at 90-100% height and then just lay out when parked.
Alpine iLX-207
JBL GTR-1001
Alpine S-W12D2
Rockford Fosgate R1525X2
Rockford Fosgate R1T-S
Amp Wiring Harness
Rockford Fosgate R169X2
so i havent taken a look at the trunk but the goal is to keep as much space as possible by hiding the tank under the floor along with all the management and compressor. i also will be building an MDF box to use as little space possible in the trunk. ideally everything should look OEM+
Wheel Vintiques Grey Smoothies & White Walls are the plans for wheels. thinking 16x7ish, but i need to go to willtheyfit or something and figure out how the offset and everything will work.
^^ a photoshop of ideally what i want the car to look like. the actual car is more of a creme color with a brown roof, but i decided to keep the original fabric and body color as i dont want to veer to far from the heart of the car as it were.
so, my grandmother passed away this april, and her and my grandfather had a 1996 cadillac deville. It was their sunday cruiser type car and i have a lot of happy memories spending time with them in it. lots of lemon drops were given to me on the way to the movies in that car. It was left to me when my grandmother passed away. I plan on giving the car a once over in terms of fixing some of the trim that has deteriorated over the years, the plastic painted chrome trim needs replacing, and i plan to put the car on air ride with some classic wheels & white walls, improve the sound system with a complete speaker & headunit replacement and get a wooden plaque made on the inside of the trunk in memory of them.
Current Proposed Main Part List -
Air Lift 3P Management (Plans to 3D print a mount for the controller on the dash, or hidden within the dash.)
Air Lift Pancake Tank (hidden in the trunk)
Air House 2
Air Aero Power Sport
a plethora of air fittings to make the system work.
the plan is to run the bags on stock struts because well...they are original, so they probably need replacing, so i can determine if i need custom struts after running the bags on stock struts. the plan if the drop is good, is to go with an Air Ditcher strut set. I dont really plan on driving the car in a lowered out state as I live in NH, and this car is a boat, so im not concerned with damaging the struts due to travel while lowered. it will pretty much ride at 90-100% height and then just lay out when parked.
Alpine iLX-207
JBL GTR-1001
Alpine S-W12D2
Rockford Fosgate R1525X2
Rockford Fosgate R1T-S
Amp Wiring Harness
Rockford Fosgate R169X2
so i havent taken a look at the trunk but the goal is to keep as much space as possible by hiding the tank under the floor along with all the management and compressor. i also will be building an MDF box to use as little space possible in the trunk. ideally everything should look OEM+
Wheel Vintiques Grey Smoothies & White Walls are the plans for wheels. thinking 16x7ish, but i need to go to willtheyfit or something and figure out how the offset and everything will work.
Comment