Announcement

Collapse
No announcement yet.

Custom 3 piece BBS Style 5 18" Conversions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Custom 3 piece BBS Style 5 18" Conversions

    For Sale:

    18x11 et +13, Lip: 4.5", Barrel: 7"
    18x9.5 et +15, Lip: 3.5", Barrel: 6"

    *Wheels were measured incorrectly and have now been updated with correct measurements. Pictures can be used for reference*

    5x120 pcd: 72.6

    Tires: NANKANG NS-20
    Rears (Brand new) 265/35/18
    Front (3000 miles) 225/40/18

    Only one front wheel has minor damage to lip (pictured). All have minor clear coat peel, but no other damage. Wheels are super clean.

    Includes 2 sets of BBS Caps, one red and one black, and tool for removing waffles.

    Everything: $2550


    IMG_0064 by sk8tmaniac, on Flickr
    IMG_0065 by sk8tmaniac, on Flickr
    IMG_0066 by sk8tmaniac, on Flickr
    IMG_0067 by sk8tmaniac, on Flickr
    IMG_0068 by sk8tmaniac, on Flickr
    IMG_0070 by sk8tmaniac, on Flickr
    IMG_0072 by sk8tmaniac, on Flickr
    IMG_1031 by sk8tmaniac, on Flickr
    IMG_1030 by sk8tmaniac, on Flickr
    IMG_1029 by sk8tmaniac, on Flickr
    IMG_1028 by sk8tmaniac, on Flickr
    IMG_1062 by sk8tmaniac, on Flickr
    IMG_1061 by sk8tmaniac, on Flickr
    IMG_1060 by sk8tmaniac, on Flickr
    IMG_1059 by sk8tmaniac, on Flickr
    IMG_1058 by sk8tmaniac, on Flickr
    IMG_1057 by sk8tmaniac, on Flickr
    IMG_1056 by sk8tmaniac, on Flickr
    IMG_1055 by sk8tmaniac, on Flickr
    IMG_1053 by sk8tmaniac, on Flickr
    IMG_1051 by sk8tmaniac, on Flickr
    IMG_1050 by sk8tmaniac, on Flickr
    IMG_1049 by sk8tmaniac, on Flickr
    IMG_1048 by sk8tmaniac, on Flickr
    IMG_1046 by sk8tmaniac, on Flickr
    IMG_1042 by sk8tmaniac, on Flickr
    IMG_1042 by sk8tmaniac, on Flickr
    IMG_1039 by sk8tmaniac, on Flickr
    IMG_1038 by sk8tmaniac, on Flickr
    IMG_1037 by sk8tmaniac, on Flickr
    IMG_1035 by sk8tmaniac, on Flickr
    IMG_1034 by sk8tmaniac, on Flickr
    IMG_1033 by sk8tmaniac, on Flickr
    IMG_1032 by sk8tmaniac, on Flickr
    Last edited by bmw535is; 03-15-2018, 06:40 PM. Reason: More Pics and correct sizes

  • #2
    Nice wheels, and good luck with the sale! Do they use the center faces from the 17" style 5's or the 18" ones? Who is the manufacturer of the custom lips and barrels? I plan on making an 18" set (but in 8.5" width), so these are too wide for what I'm looking for.

    Comment


    • #3
      Bump
      Last edited by bmw535is; 03-15-2018, 03:11 PM.

      Comment


      • #4
        Thanks for the info! I appreciate it. I want to end up with an ET13 offset on the 8.5" width, which means if I get smaller lips the offset will unfortunately be too high with your barrels since they are already at ET13 at 12 inches wide (and ET15 at 10.5" wide). I would need to decrease the width of the barrels too.

        Side note: Your wheels confirm that I should use the 17" Style 5 centers to make an 18" wheel. They look fantastic! It leaves more room for a nice step in the lip. I personally think the spokes of the 18" centers look much to elongated, and this confirms my suspicion that using the 18" centers would leave little room for a step lip while keeping the wheel diameter at 18".
        Last edited by m60power; 03-02-2018, 07:01 PM.

        Comment


        • #5
          Bump

          Comment


          • #6
            Originally posted by m60power View Post
            Thanks for the info! I appreciate it. I want to end up with an ET13 offset on the 8.5" width, which means if I get smaller lips the offset will unfortunately be too high with your barrels since they are already at ET13 at 12 inches wide (and ET15 at 10.5" wide). I would need to decrease the width of the barrels too.

            Side note: Your wheels confirm that I should use the 17" Style 5 centers to make an 18" wheel. They look fantastic! It leaves more room for a nice step in the lip. I personally think the spokes of the 18" centers look much to elongated, and this confirms my suspicion that using the 18" centers would leave little room for a step lip while keeping the wheel diameter at 18".
            Sorry but They are actually 18" BBS Style 5 faces off the RC 061, RC 062. Only conversion was to 3 piece

            Comment


            • #7
              Bump. Updated with correct sizes and pics.

              Comment


              • #8
                Bump!

                Comment


                • #9
                  What the best price you can do. I have some Style 5 that I was going to rebuild but you pretty much built them to almost the exact spec I need except I dual drilled my to 5x100. Let me knw!
                  IG: tonygqmoney

                  Comment


                  • #10
                    Originally posted by tonygqmoney View Post
                    What the best price you can do. I have some Style 5 that I was going to rebuild but you pretty much built them to almost the exact spec I need except I dual drilled my to 5x100. Let me knw!
                    PMD you bro!

                    Comment


                    • #11
                      Bump!

                      Comment


                      • #12
                        Would you consider any trades?

                        Comment


                        • #13
                          Originally posted by Aflowpnw View Post
                          Would you consider any trades?
                          Looking for cash atm, but PM me what you have.

                          Comment


                          • #14
                            bump!

                            Comment


                            • #15
                              Bump, will take valid offers

                              Comment

                              Working...
                              X