Announcement

Collapse
No announcement yet.

3pc dimensions...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 3pc dimensions...

    Hey guys,


    I need some help finding the dimensions of my OZ 3 piece wheels. I'm a little confused at the moment.




    Front:


    Rear:




    I have to measure from tyre seat to tyre seat, right? And the tyre seat J is 17,3mm on each side.

    Front:
    width: 254mm - 34,6mm = 219,4mm => 219,4mm / 25,4mm = 8,63"
    barrel: 190mm - 17,3mm = 172,7mm => 172,7mm / 25,4mm = 6,8"
    lip: 64mm - 17,3mm = 46,7mm => 46,7mm / 25,4 = 1,84"

    So a 9" wheel with 2" lips and 7" inner barrels...?


    Rear:
    width: 278 - 34,6mm = 243,6mm => 243,6mm / 25,4mm = 9,58"
    barrel: 205 - 17,3mm = 187,7mm => 187,7mm / 25,4mm = 7,39"
    lip: 73 - 17,3mm = 55,7mm => 55,7mm / 25,4 = 1,84" = 2,19"

    So a 10" wheel with 2,5" lips and 7,5" barrels...?



    I know, might be an easy one, but as I said, I dont actually know and want to make sure I sell them with the correct dimensions. Thank you.
    Tut DAS denn Not, dass der Karren so tief is?

  • #2
    18s?

    If yes, they have lips and barrels in .25" steps...


    From the measurements you provided i get:

    254mm - 34,6mm = 219,4mm about 8,63"

    278mm - 34,6mm = 243,4mm about 9,58"


    My guess... 8,5 with 1,5" lips and 6" barrels, 9,5 with 2" and 7,5".
    They OZ Breytons i had some time ago, had exakt that...


    Easiesed way to figure out the width of lips/barrels is to place
    the flange on a flat surface and measure to the tire seat...
    Also may get a tape measure with Inch on it.


    Comment

    Working...
    X