Hey guys,
So recently installed an airrex kit in my G37.
Everything is straight forward, problem is, in my remote, the front left side reading is wrong.
The reading seems to be stuck at 225 psi (even though its aired out or with pressure). I can still control the amount of pressure that goes in the bag (i use the front adjustment to estimate how much pressure is in it pairing it with the front right).
My airrex dealer tried changing the sensor with a new one but the reading was now 240. We tried swapping the front sensor plugs over, the reading was then 225psi on the front left but the front right reading was still good.
With this problem, it won't let me do any presets as the front left reading is wrong
Can anyone point us in the right direction?
Thanks
Magel
Here some pictures of the controller and the board. The 3rd LED light blinks whilst the 2nd one is off.
Untitled by magelloDSLR, on Flickr
Untitled by magelloDSLR, on Flickr
So recently installed an airrex kit in my G37.
Everything is straight forward, problem is, in my remote, the front left side reading is wrong.
The reading seems to be stuck at 225 psi (even though its aired out or with pressure). I can still control the amount of pressure that goes in the bag (i use the front adjustment to estimate how much pressure is in it pairing it with the front right).
My airrex dealer tried changing the sensor with a new one but the reading was now 240. We tried swapping the front sensor plugs over, the reading was then 225psi on the front left but the front right reading was still good.
With this problem, it won't let me do any presets as the front left reading is wrong
Can anyone point us in the right direction?
Thanks
Magel
Here some pictures of the controller and the board. The 3rd LED light blinks whilst the 2nd one is off.
Untitled by magelloDSLR, on Flickr
Untitled by magelloDSLR, on Flickr
Comment