PDA

View Full Version : viair 95c



Dsfaxon
03-24-2014, 12:32 AM
hey guys. putting this compresser on a ruckus.

do you think that im fine running it straight to the cylinder without using a stainless line?

i dont think that it will get hot enough to burn up the line, but i could be wrong!

Oh Damn, it's Sam
03-25-2014, 10:03 AM
What kind of line are you planning to use?

Also, don't forget that you need a check valve somewhere between the compressor and tank, so be sure to factor that into your plans.

EDIT: I just looked at the 95c on Viair's website, and I stand corrected on a couple of things. It looks like there's a checkvalve integrated into the head. With the plastic head and the attached PTC connector, I wouldn't hesitate to run plastic DOT air line right off the head. I'd just make sure to keep the line routed away from the head or the motor housing of the compressor.

Dsfaxon
04-15-2014, 02:23 PM
Thats what i ended up doing! The setup isnt totally complete, but here is what ive got so far! Just waiting on the air strut to be finished!

http://img.tapatalk.com/d/14/04/16/ebenyqa6.jpg

http://img.tapatalk.com/d/14/04/16/7y5ebazu.jpg

http://img.tapatalk.com/d/14/04/16/rajasyda.jpg

Daviticus
04-16-2014, 10:13 AM
Gangster son. Looking fine.

Dsfaxon
04-29-2014, 11:51 PM
Air'd up/ air'd down



http://img.tapatalk.com/d/14/04/30/4ubu9emu.jpg

Daviticus
04-30-2014, 03:04 PM
Yes!

Dsfaxon
05-01-2014, 01:48 AM
Come to form faction dave, and you will see it in my booth. 👍