My new project car that i've been putting together for the past year.
1984 audi coupe gt. . 99,xxx original miles
plans:
BBS RS 16x7.5 16x8.5
2 bennett coilovers
shaved bay
interior overhaul
bumper tuck
Progress so far
front bumper tuck before and after
rear bumper tuck before and after
got the 2bennet coil over program
Tthe fenders in the process of getting pulled. Like alot of pulled fenders i've seen nobody keeps the factory line.
I wanted to achieve the factory look to keep things subtle and clean. Also getting entire car resprayed and some bits shaved as well.
here's some progess pics.
inner lip pulled
reinforcement\factory line added
pulled about 1 inch
fronts completed! They were pulled 1.25 inches. Now working the dents out of the body and going to get the entire interior redone.
Rear shots
Part 2 of the Coupe GT build. We started stripping the interior and getting it ready to have it completely re-upholstered top to bottom.
teaser of the front lower portion already completed
seats finished!! its coming together very nicely
little update car almost ready for paint!
in the booth for paint!!
some updated pics. car is going back to get the front pillars painted black i changes my mind on a couple things. here's some teaser pics
back in the paint booth for more changes. i decided to get the a pillar, and c pillar painted black. seemed to flow a bit better than before.
car is at the upholstry shop now getting carpet, and headliner re-done. as for now here is a sneek peak of the wheels!
goodies showed up from germany
3" bbs rs lips
last week before the big show. Audi interior is 90% done. Carpet, headliner, rear deck and pillar trim pieces are now complete.
Wheels are are now rebuilt, painted and widened.
fronts are now 16x8.5 rears are 16x9.5
my dad getting involved in putting the wheels together
rear final product
interior shots
headliner wrapped in suede
close ups of the boot and shifter in suede with white piping
wheels on!!
tail lights were refinished, and tinted
not exactly sure what the final offsets are. i'll measure today
dash out and ready to get wrapped. Going to delete the speaker holes on top and relocate those.
some interior shots
decided to go with a new exhaust system. I wanted to go a little more aggressive than the traditional rear exit setup. I'm sure i will change it up after i get bored with it
but for now
Out with the old
in with the new!
stainless and tig welded by eurowise
1984 audi coupe gt. . 99,xxx original miles
plans:
BBS RS 16x7.5 16x8.5
2 bennett coilovers
shaved bay
interior overhaul
bumper tuck
Progress so far
front bumper tuck before and after
rear bumper tuck before and after
got the 2bennet coil over program
Tthe fenders in the process of getting pulled. Like alot of pulled fenders i've seen nobody keeps the factory line.
I wanted to achieve the factory look to keep things subtle and clean. Also getting entire car resprayed and some bits shaved as well.
here's some progess pics.
inner lip pulled
reinforcement\factory line added
pulled about 1 inch
fronts completed! They were pulled 1.25 inches. Now working the dents out of the body and going to get the entire interior redone.
Rear shots
Part 2 of the Coupe GT build. We started stripping the interior and getting it ready to have it completely re-upholstered top to bottom.
teaser of the front lower portion already completed
seats finished!! its coming together very nicely
little update car almost ready for paint!
in the booth for paint!!
some updated pics. car is going back to get the front pillars painted black i changes my mind on a couple things. here's some teaser pics
back in the paint booth for more changes. i decided to get the a pillar, and c pillar painted black. seemed to flow a bit better than before.
car is at the upholstry shop now getting carpet, and headliner re-done. as for now here is a sneek peak of the wheels!
goodies showed up from germany
3" bbs rs lips
last week before the big show. Audi interior is 90% done. Carpet, headliner, rear deck and pillar trim pieces are now complete.
Wheels are are now rebuilt, painted and widened.
fronts are now 16x8.5 rears are 16x9.5
my dad getting involved in putting the wheels together
rear final product
interior shots
headliner wrapped in suede
close ups of the boot and shifter in suede with white piping
wheels on!!
tail lights were refinished, and tinted
Originally posted by flipper13
dash out and ready to get wrapped. Going to delete the speaker holes on top and relocate those.
some interior shots
decided to go with a new exhaust system. I wanted to go a little more aggressive than the traditional rear exit setup. I'm sure i will change it up after i get bored with it
but for now
Out with the old
in with the new!
stainless and tig welded by eurowise
Comment