If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I was thinking of spacers to. My car was lower but I had to raise do to my driveway my car bottomed out all the time going in and out so I could not have it that low. Unfortunetly this is as low as I can go.
Better angle, and details of what you have done already would help
Running coils with 18x8.5 wheels with et 35 Rear spacers are 12mm nothing up front Im wondering if I can run 20mm spacers on the rear and 10mm front. But i think I have to flare my fenders to do that.
Running coils with 18x8.5 wheels with et 35 Rear spacers are 12mm nothing up front Im wondering if I can run 20mm spacers on the rear and 10mm front. But i think I have to flare my fenders to do that.
Running coils with 18x8.5 wheels with et 35 Rear spacers are 12mm nothing up front Im wondering if I can run 20mm spacers on the rear and 10mm front. But i think I have to flare my fenders to do that.
You could run a 20mm spacer without flaring, if you run 215/35 tires. You'd only need rolled fenders for that.
10mm in the front wouldn't be a problem either, would sit flush and work without fender work, if you aren too low. With 215/35 of course. If you run more meat than that... well.
Comment