advice please

[prtaino]

Here is a pic of my cer tell me what I need to achieve perfect stance.

http://i14.photobucket.com/albums/a307/prtaino/My%20M3/SocalEuroBig09002.jpg

Picture thanks Pswirley.:eyebrows

[1985zcar]

Posted in the wrong section...

But car looks really good...More pics would be nice.

From this picture I would say you need to space the wheels and lower it a little more (at least in the front)

Hot car!

[BADwayz]

Better angle, and details of what you have done already would help

[sb253]

tell me what I need to achieve perfect stance.



your own style and creativity?




sometimes its fun to figure it out yourself. Try it

[SeanDub]

your own style and creativity?




Truth.

[Stolzy]

fro m what it looks your ride heiht is pretty good. lower is always better though

but some spacers would be perfect

[schroedin]

Lookin goood.

[prtaino]

I was thinking of spacers to. My car was lower but I had to raise do to my driveway my car bottomed out all the time going in and out so I could not have it that low. Unfortunetly this is as low as I can go.

[schroedin]

Fix your driveway. :shifty

[prtaino]

I know dude it sucks.

[prtaino]

Better angle, and details of what you have done already would help


Running coils with 18x8.5 wheels with et 35 Rear spacers are 12mm nothing up front Im wondering if I can run 20mm spacers on the rear and 10mm front. But i think I have to flare my fenders to do that.

[BADwayz]

Running coils with 18x8.5 wheels with et 35 Rear spacers are 12mm nothing up front Im wondering if I can run 20mm spacers on the rear and 10mm front. But i think I have to flare my fenders to do that.

tire size?

[Dr.AK]

Running coils with 18x8.5 wheels with et 35 Rear spacers are 12mm nothing up front Im wondering if I can run 20mm spacers on the rear and 10mm front. But i think I have to flare my fenders to do that.

You could run a 20mm spacer without flaring, if you run 215/35 tires. You'd only need rolled fenders for that.
10mm in the front wouldn't be a problem either, would sit flush and work without fender work, if you aren too low. With 215/35 of course. If you run more meat than that... well.

[Pswirley]

Pedro,

come to SD this weekend and I will shoot your car.

[prtaino]

Pedro,

come to SD this weekend and I will shoot your car.

Give me a call bro on where to go.

[prtaino]

You could run a 20mm spacer without flaring, if you run 215/35 tires. You'd only need rolled fenders for that.
10mm in the front wouldn't be a problem either, would sit flush and work without fender work, if you aren too low. With 215/35 of course. If you run more meat than that... well.

I am pretty low man and my tires are 215/40/18

[Dr.AK]

I'd suggest swapping out the tires then. 215/35 is a must for a good stance on 8 to 9J wide 18s on an E36 imo.

Also some more pics to see how low it is.

[SeanDub]

Define low ;)

[prtaino]

Define low ;)

When you can barely see your tires on the top.:eyebrows

or when barely can drive your car thru your driveway.:eyebrows

[SeanDub]

Barely see your tires? I CANT see my tires, and im runnin fairly decent stretch :stickoutt

[prtaino]

Barely see your tires? I CANT see my tires, and im runnin fairly decent stretch :stickoutt

Not all of us can achive your stance mad props for that bro.

[SeanDub]

I believe in you!

thanks though, now get us some more pics!

[Ollie]

Here is a pic of my cer tell me what I need to achieve perfect stance.
Camber plates up front. Smaller tires all around- 215/35 like dr.ak said. Buy or rent a fender roller. If your fenders are already rolled, calculate how much more poke you need, and buy spacers that size. Lower the car until you have credit card clearance and roll the fenders until you have just enough clearance. Buy stiffer springs if the rear rubs and whatever you do, don't turn on an incline or hit anything whatsoever with the wheel turned. Oh and deal with your driveway or park in the street.;)

[SeanDub]

whatever you do, don't turn on an incline or hit anything whatsoever with the wheel turned.

Best advice.

[prtaino]

So I have to pretty much learn to drive my car all over LOL

[prtaino]

Coming soon 20 mm rear and 10 mm front and more drop phuck et.

[SeanDub]

Atta boy!

[prtaino]

WHERE CAN i GET THE 20MM

[SeanDub]

http://www.turnermotorsport.com/html/subcategory_detail.asp?modelcode=E36&subcat_id=93

[prtaino]

Thanks Sean here soon to have better stance. I have to see how much lower I can go.

[frey328is]

I was thinking of spacers to. My car was lower but I had to raise do to my driveway my car bottomed out all the time going in and out so I could not have it that low. Unfortunetly this is as low as I can go.

My driveway is a bitch too:( have to go at a huge angle

my frame sits just under 2 inches off the ground still :eyebrows


spacers sound good.

[SeanDub]

Thanks Sean here soon to have better stance. I have to see how much lower I can go.

Glad I could help :)

[Dr.AK]

Anxious to see the result, this can only result in win, I hope or think or whatever.

[prtaino]

O yes dude I have been looking at sean's car and admiring the stace se where this goes. I wanna look good to lol.