I have a set of Gotti 140-US for sale.
14x7
4x114.3
The centers were blasted and are ready for powder or paint. The wheels are in pretty good shape. I took photos of the worst pitting on the faces and on the lips themselves. They are true wheels and have no signs of bends. I also still have the aluminum washers which were used on the back of the wheels. The original hardware was too rusty to keep, but they had button head cap screws originally. The wheels accept a normal 1/4-20 fastener so that makes the hardware selection pretty wide, cheap and easy to procure. The lips have a number "2" on them which is pictured below. I think this is the width of the lip, because they are indeed 2". I did not have these numbers intentionally polished out, but you can see they are fading. I have seen these wheels and they supposedly take Datsun centercaps from a 240Z or 510 of the era. I have not confirmed this yet.
As is: No hardware other than the aluminum washers and the raw blasted centers -- $700
Shipping at your expense if needed.
14x7
4x114.3
The centers were blasted and are ready for powder or paint. The wheels are in pretty good shape. I took photos of the worst pitting on the faces and on the lips themselves. They are true wheels and have no signs of bends. I also still have the aluminum washers which were used on the back of the wheels. The original hardware was too rusty to keep, but they had button head cap screws originally. The wheels accept a normal 1/4-20 fastener so that makes the hardware selection pretty wide, cheap and easy to procure. The lips have a number "2" on them which is pictured below. I think this is the width of the lip, because they are indeed 2". I did not have these numbers intentionally polished out, but you can see they are fading. I have seen these wheels and they supposedly take Datsun centercaps from a 240Z or 510 of the era. I have not confirmed this yet.
As is: No hardware other than the aluminum washers and the raw blasted centers -- $700
Shipping at your expense if needed.
Comment