need to sell. i have fines to pay and cars to fix.
16x9.5 et 38
5x120.65
hub: 70.3mm
195/50/15. 2 tires are shot and are show the metal wires, the other 2 are alright. I don't remember brands off the top of my head.
PRICE: $300 obo
i hand polished these wheels myself over the summer, not the greatest by any means and could use a good clean up. the paint in the "windows" is pealing and could use a nice rattle can spray job. im currently in school and the wheels are back home in Ephrata, PA. the clutch went out in my car so i dont have time to clean them up or even drive home, so you will most likely have to pick them up from my garage. sorry i dont have any other pictures besides ones with them mounted on my car :/
For those wondering how i made this work on my car:
i ran a 15mm spacer up front, 17.5 in the rear then used a 5mm universal spacers that wasnt hub centric over top of those so i didnt have to worry about the smaller hub size. the different bolt pattern would bolt up, but i personally dont recommend doing it. i think the lug holes on my hub are getting stripped out because of this. if i was gonna run these again i would try wobble bolts or just adapters.
Contact info:
text/call: 717-405-1551
email: derrickgroff@hotmail.com
PM's but i dont always sign on here often.
16x9.5 et 38
5x120.65
hub: 70.3mm
195/50/15. 2 tires are shot and are show the metal wires, the other 2 are alright. I don't remember brands off the top of my head.
PRICE: $300 obo
i hand polished these wheels myself over the summer, not the greatest by any means and could use a good clean up. the paint in the "windows" is pealing and could use a nice rattle can spray job. im currently in school and the wheels are back home in Ephrata, PA. the clutch went out in my car so i dont have time to clean them up or even drive home, so you will most likely have to pick them up from my garage. sorry i dont have any other pictures besides ones with them mounted on my car :/
For those wondering how i made this work on my car:
i ran a 15mm spacer up front, 17.5 in the rear then used a 5mm universal spacers that wasnt hub centric over top of those so i didnt have to worry about the smaller hub size. the different bolt pattern would bolt up, but i personally dont recommend doing it. i think the lug holes on my hub are getting stripped out because of this. if i was gonna run these again i would try wobble bolts or just adapters.
Contact info:
text/call: 717-405-1551
email: derrickgroff@hotmail.com
PM's but i dont always sign on here often.
Comment