Tweet
Hi,
I've been following the stanceworks blog for a while now, so why not the forum.
Since some is written in dutch and some in english, i'll just stick to english for now..comments in dutch are no problem of course.
Anyway; Here is my '93 fiat panda 1000 that i own for 1,5 years now. As far as i know it's the lowest panda now. It's lowered 130mm, has raised turrets and engine' and welded a strutbar in. I also had to make a c-cut in the subframe for the driveshaft. there are no coilovers or supershort springs available for this car, so i've shoterened the original shockabsorbers and cut some -40 springs. In the rear they are half the length of the original ones.
The wheel are Fiat Uno turbo wheels wich i've polished. The steering wheel is from an old alfa with a homemade mountingplate and i have a screwdriver as a shifter.
future plans are adding some strips on the side to hide the once rusty bits on te bottom of the doors and probably a roofrack.
For me it's a blast to drive and scrape this stupid little car. i never thought i would keep this car for long but it has grown on me.
Cheers/groeten, Lennart
]IMG]http://farm8.staticflickr.com/7079/7243651182_b806a951e7_z.jpg[/IMG]
I've been following the stanceworks blog for a while now, so why not the forum.
Since some is written in dutch and some in english, i'll just stick to english for now..comments in dutch are no problem of course.
Anyway; Here is my '93 fiat panda 1000 that i own for 1,5 years now. As far as i know it's the lowest panda now. It's lowered 130mm, has raised turrets and engine' and welded a strutbar in. I also had to make a c-cut in the subframe for the driveshaft. there are no coilovers or supershort springs available for this car, so i've shoterened the original shockabsorbers and cut some -40 springs. In the rear they are half the length of the original ones.
The wheel are Fiat Uno turbo wheels wich i've polished. The steering wheel is from an old alfa with a homemade mountingplate and i have a screwdriver as a shifter.
future plans are adding some strips on the side to hide the once rusty bits on te bottom of the doors and probably a roofrack.
For me it's a blast to drive and scrape this stupid little car. i never thought i would keep this car for long but it has grown on me.
Cheers/groeten, Lennart
]IMG]http://farm8.staticflickr.com/7079/7243651182_b806a951e7_z.jpg[/IMG]
ook niet via het manage attachments scherm. die eerdere foto's kwamen rechtstreeks van m'n computer.
Comment