PDA

View Full Version : 17x9.5 Enkei RPF1s SBC finish 5x120mm

Geoff.T
12-23-2009, 12:15 PM
17x9.5in Enkei RPF1. Final offset is et13. The wheels are et18 but thin spacers must be used due to the centerbore being too shallow. These wheels were redrilled to 5x120. They are very light weight at 16.75lbs

There are minor nicks but overall every clean wheels.

rear tires have 1,000 miles on them. The fronts are worn down on the inside edges due to camber wear. They are Falkens all around. 235/40r17s

I'll take better pictures later. For now here they are:

http://farm3.static.flickr.com/2674/4196472137_a6dbe520e2_b.jpg

http://farm3.static.flickr.com/2761/4171563970_6205c92c33_b.jpg

http://farm3.static.flickr.com/2557/4170806421_c0c9922145_b.jpg


Looking to get $1,200
B Rod
12-23-2009, 01:49 PM
Saw these in person. They look great!
RD408
12-23-2009, 01:56 PM
^ What he said.
GLWS!
balleur
12-24-2009, 12:46 PM
So they ate comin with spacers and tires correct? Any pics if the re-drilling?
Car looks great btw
Geoff.T
12-24-2009, 07:52 PM
Yes, tires and spacers are included. Although the front tires are pretty shot. I'll get some pics after the new year. They are locked up at my work and I won't be back until the 3rd.
Logan
12-25-2009, 04:14 PM
Sickness.

What headlights are using btw?
Joey
12-27-2009, 06:15 PM
omfg. would you take 1000$?
Geoff.T
01-03-2010, 04:52 AM
Sickness.

What headlights are using btw?

DDM depos with 6,000K CCFL angel eyes
Atlantian
01-03-2010, 06:49 AM
Wheels look good, good luck with the sale. :)

Btw, is that an actual M3 sedan?
Geoff.T
01-03-2010, 07:20 AM
Yes, e36 M3 sedans were only made in '97 and '98
southpaw
01-03-2010, 02:55 PM
Amazing.
Morbid
01-04-2010, 04:19 PM
How big is the center bore and what type of spacers did you have to use? Just wondering.

These look sick, wish I was more loose with my money :-P
da_force
01-05-2010, 04:37 AM
Free bump for great wheels! :D

If I was there I'd buy em imediatly :alright

Any chance of shipping over the pond? :eyebrows

edit:

I somehow came to conclusion at Enkei site, that they don't make rpf1 17x9.5 in SBC finish... how did you then get your hands on such? :confused
Richard_Gud.
01-06-2010, 05:20 PM
touge factory exclusive my friend.
activ3
01-08-2010, 11:41 AM
Free bump for great wheels! :D

If I was there I'd buy em imediatly :alright

Any chance of shipping over the pond? :eyebrows

edit:

I somehow came to conclusion at Enkei site, that they don't make rpf1 17x9.5 in SBC finish... how did you then get your hands on such? :confused
You can order them in SBC for extra $$.

OP, would you by chance be interested in a trade for step lip work equips 17x9.5?
Geoff.T
01-12-2010, 02:35 AM
How big is the center bore and what type of spacers did you have to use? Just wondering.

These look sick, wish I was more loose with my money :-P

center bore is 73mm.

You can order them in SBC for extra $$.

OP, would you by chance be interested in a trade for step lip work equips 17x9.5?


Any pics?


More pics of my wheels... Not clean though.

http://i2.photobucket.com/albums/y35/NotAnotherE36/DSC_0041-1.jpg

http://i2.photobucket.com/albums/y35/NotAnotherE36/DSC_0042-1.jpg

http://i2.photobucket.com/albums/y35/NotAnotherE36/DSC_0043-2.jpg

http://i2.photobucket.com/albums/y35/NotAnotherE36/DSC_0044-4.jpg

http://i2.photobucket.com/albums/y35/NotAnotherE36/DSC_0045.jpg

http://i2.photobucket.com/albums/y35/NotAnotherE36/DSC_0046-5.jpg
balleur
01-12-2010, 01:30 PM
pm sent brotha, lmk