Cannons 3rd Attempt: Low'N'Load rx7 fc3s Vert

[Cannon]

soooooooo...

the super duper wide 200sx got sold... and i missed it,

the bmw got sold... to a judge... no joke..

and i wanted to get back into jap.. and you know me.. i love cars that are a little different

1989 Rx7 Fc3s Vert Turbo :)

its got 97k on the clock, and all in all is actually pretty clean considering its a 22 year old car, the normal small scuffs and 2 rips in the roof (in the place you get on any soft top car)

I bought this car from a customer of mine who had the car for the last 14 years. When he first bought it he had the engine rebuilt by WGT racing, and a full body respray. Since his owner ship he has moved a couple of times and the history for the car seems to be scattered about. He just called me on Saturday to say his father found the old MOT's at his house and the tannoue cover for the roof was at his warehouse, which he is dropping off on Wednesday to me.

Specs are

Owned for 14 years by the previous bar one owner
Rebuild at 88k by WGT
Brand new 2 mile old BC racing Coilovers
weds kranze split rims 17x9 17x8 et8
Brand new tyres all round
8 Months MOT
3 Months Tax
Leather interior
Silicone hoses
Dump valve
Recent oil change
Cruise Control
Electric roof
Uprated speakers
Kenwood disk changer
Two amps (fuses disconnected as no head unit) professionally wired in
Heated rear screen
LSD


ONTOP of this all I got dual exit exhaust system for the car (bout a 3 or 4" slash cut tip on both sides, and all pipework and decat as well) and skirts + spats already colour coded to the car

so far only driven it 2x

electric roof works, all lights work and pop ups work, and leather is very very comfy.. and ride isnt crazy bumpy, tho it may be a tad low as the camber of my road makes the exhaust scrape LOL!!

PLANS are to either give it a massive tcut and polish OR spray it NATO GREEN, pending how i feel about it in a few days, raise it a few mm's and then do some roof repairs, either duct tape or look into new roof/proper stitch and patching, get some tests done on the engine (its been champagne tested in the last month?????? whatever that is)

and then skid it a bit.. as Its LOVELY to drive

ANYWAY a few pics for you..

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-09-30184012.jpg
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-09-30184026.jpg
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-09-30191138.jpg
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-09-30191150.jpg
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/P1020416.jpg
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/P1020421.jpg
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/P1020840.jpg
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/P1020850.jpg
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/P1020857.jpg
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/P1020860.jpghttp://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/P1020877.jpghttp://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/P1020875.jpg


and the extras i got

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-09-30193613.jpg
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-09-30193929.jpg
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-09-30193948.jpg

__________________________________________________ __________________

so today we and josh went out and patched the roof rips for a temp fix

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-01103322.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-01103333.jpg


then had a little look behind the rear seats

and found these :D :D

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-01102558.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-01102604.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-01102609.jpg


to which led to me discovering that the inside of the rood is lines with molehair :) wooop

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-01105103.jpg



popped the bonnet open to check to see if anything had leaked overnight

found the amp wires

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-01105243.jpg


and then took some pics of the tops of the suspension struts and realised how mega clean they are for a 22 yr old car :) :)

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-01104828.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-01104809.jpg




and then took a few pics of the roof up so you guys can see how it looks :) :)


http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-01105735.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-01105711.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-01105649.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-01105636.jpg


typical cannon pic whorage :) x

__________________________________________________ __________________

ANYWAY!!!

what i did today

Tested the fitting of the Tannau Cover :)

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-02111527.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-02111532.jpg

THEN took the car for a drive, and after finding out i had 17mm clearence under it, raised the rear 15mm
check out the mega clean coillys :) :) :)

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-02135507.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-02142001.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-02142015.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-02145854.jpg

and then made sure the front no longer touched using the tape measure trick :)

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-02141135.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-02164742.jpg

took it for a test drive and got stuck behind these

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-02143113.jpg


and last but not least went out for a spin in jims sr20de Datsun.. its AMAZING, cant wait to get the sr20det into this

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-02181210.jpg

love it..


on the test run to kemals however stu performed a harsh brake to stop himself running into a car that randomly stopped, locked up and pulled a 90 degree flick on the motorway and managed to not hit anything, lucky lucky guy, however now has a lovely flat spot on his tyres - check the tread out

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-02195830.jpg


And then upon arriving at kemals en route to the seafront a metro burst into flames.. lol

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-02200924.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-02200851.jpg


fun times.. o yeah and we put some rims on ads's ps13 ;) he can show you those :)


__________________________________________________ __________________

so whilst preparing for a interview today i got a knock on the door.. and this turned up

37kgs ... could only assume its my weldy :) :)

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-04143605.jpg

and then another van rocked up and delivered a boss for the fc... and then also have me a big parcel with

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-04143316.jpg

which lead to

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-04144019.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-04150147.jpg

and then swapped the DV over for josh's SSQV as a temp steal til he gets a 13 :)

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-04152625.jpg


and found this amazing sticker on the passenger sun visor :) :)

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-03103624.jpg


so all in all.. an eventful day


HOWEVER!!! 1 small thing.. went to segensworth from pomps, after a good blast at 70mph on the motorway pulled onto the segensworth slip road leading to the roundabout and upon coming to a stop there was smoke coming from the underside of the car about the same place as the cat was from the underside, being in traffic i couldnt see this to be sure but it was coming from both sides of the car, no heat increase, no oil temp change or oil pressure change or water temp change, the lights changed colour and i pulled off and stopped round the corner and there was no smoke coming from under the car then, so im thinking maybe i do near new brakes on the car if they were infact smoking, if the fact there is a bit of wheel wobble at speed/the car hasnt been tracked since lowering it cause the wheels to smoke, or if where the heatshield 'came' off the cat the other day it was the centre section of the exhaust overheating from the prolonged heat from being sat at 5000rpm on the motorway for 20mins...

so the mystery is to be rekindled tomorrow.. as i will go get the tracking and wheels balanced, fit the decat, and then check all the discs and pads, as the rears are a lil low, but dont think its them causing the issue..

also ordered some DW internal drive wheel nuts as mine are pretty groggy ones and i feel like they are going to round every time i have removed them .. so they will also be here tomorrow


ALSO!!! thanks to ads and our lil halfords trip I now own a trolley jack, axel stands, and a slidey padded tray to lay on woop wooop

:) :)

Just to add also got the new alarm going in with full microwave sensors and locking, and also got the stereo and amps sorted with a lil help from sextons


__________________________________________________ __________________

So expensive as fooooook day today but hey.. needs must

Clifford Alarm fitted to car by Dragon Audio and Security, great work and top bloke, have business cards if people need alarms fitted this is a CAT 1 alarm so insurance love it

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-06161343.jpg

Also with some help from ads and josh we test fitted the exuast system to the car (by test fitted I mean mesured up)

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-05162232.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-05162052.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-05162034.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-05161927.jpg

also got the bits from halfords to help working on it

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-05151218.jpg

Previous owner has managed to silicone in the centre caps, which was fun, had to cut them out

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-05121349.jpg


ALSO rear brakes 100% need changing, so have bought brembo's and some new rear pads

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-06130309.jpg

and to show that the car can be jacked without stilts ;)

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-05120717.jpg

...and also fitted my DW internal drives

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-05104444.jpg

fun day

discs and pads being done tomorrow

however found a random pip that goes into the cat, looks like the air pump pipe according to the web, so not 100% on if i will decat til i find out how to go about this plug and pipe and if i can just block it or if it is important..

ANY rex owners would love tips on this :) :)



__________________________________________________ __________________

Awesome cannon, car looks amazing, bet your well chuffed, look forward to seeing it in the metal you should def fit an s13 pre facelift front splitter

Find me one and it will go on, along with the SKIRTS and SPATS that came with the car ;) ;) ;) ;) ;)


right so in my fragile state, i decided it was tim eto borrow a ramp and do the oil and gearbox and panel filter

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-30123911.jpg
thanks to Opie Oils for these :)

oil filter took literally 20 seconds to unscrew and change, seemed a little too easy if you ask me.. LOL

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-30124143.jpg

then emptied all the oil

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-30124707.jpg

and filled with fresh 10w40

then dumped out the gearbox oil, only took about 2 litres which was less than i thought as i thought the rex's took about 2.5 litres.. however the level checks out so???

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-30132602.jpg

Used the old Beer funnel trick to fill the gearbox oil with the 75w90 which when using the small hose took about 30mins for 200ml.. moved to the bigger tube from b+q.. (2quid for 2 meters, cheers then) and did the other 1800ml in bout 2 mins :) winner

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-10-30142548.jpg

so yeah, gear changes are 98% less crunchy and smoother when cold and warm.. which is awesome,

now im off for some double xp cod for a few hours

still waiting for my 2 new front calipers to turn up and then will consider popping the weldy in ;)

also need protyre in fareham to try and track the car as they are the only people i know of with a flat ramp in the portsmouth/fareham area??? anyone else know anywhere with a flat ramp and tracking abilities ??
__________________________________________________ __________________


also trying to get another s13 prefacelift splitter... and now i have

got a prefacelift.. and a facelift one.. depending on how low it goes.. although it does actually sit static on the floor...
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/P1020420.jpg

that pic is an original from the last owner


o yeah and the 4 pots turned up

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-11-01185214.jpg


__________________________________________________ __________________


So took the car to Style and Slide workshop

Lads were great dan and nat cant thank you enough, and Lou thanks for lending me the wagon to get down there with the parts :)

1st thing, was to do the brake calipers for the siezed piston -

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/SAM_0240.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/SAM_0241.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-05115805.jpg

while nat was sorting that, stuck a cheeky 18" rim on for a test fit.. lol

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-05135851.jpg

and dan set to work on the zaust, 1st thing was to cut open the decat and empty all the crap out of it.. there was alot rattling around inside it

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-05115206.jpg

then weld the downsizer on and reseal it

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-05114656.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-05122516.jpg

and then build all the system up to make sure it would fit...which it almost did.. LOL

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-05132952.jpg

then with the joys of rotary engines having an air pip that goes into the cat so when the car starts cold it goes to 3000rpm for a few seconds and then back down to heat the cat.. but when removed can cause issues... so dan cut the old one off the cat and then drilled and welded it onto the decat, and then used his magic to adjust the whole system and make it fit :) :)

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-05151216.jpg

heres a comparison shot for you all

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-10-05162034.jpg

then drove it an hour and a bit to Brockham for an AMAZING bonfire and firework display, and then took it to the lads opposite for a cheeky clean


http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-11-05205544.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/2011-11-05203643.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-06144932.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-06145030.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-06145409.jpg



__________________________________________________ __________________



so today i woke up, went to move the car, and did the usual morning checks, and then found i had no coolant, rolled the car back and found i had def ost some water

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-07082304.jpg

luckily work let me have a half day so came hom at 1 and with the help of Adam got cracking on the car

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-07145544.jpg

rmeoved the undertray which was full of leaves and oil etc

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-07145702.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-07145712.jpg


aaaand it all turned out to be a cheeky little split hose that went into the side of the engine block.. which was a massive relief

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-07145839.jpg

so then we took the car out of wheelie mode and test fitted the side skirts


http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-07150239.jpg


I LOVE them.. and they hide the rust lol

just need the splitter to turn up and its bodykit fun time

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-07154645.jpg
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-07154543.jpg


cannon out.. :)
__________________________________________________ __________________



Car went in over the weekend for a professional clean and spruce

g3, g7, g10, boat wax, polish, and alot of treatment... and holy cow it came out well


http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-11150845.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-11150816.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-11150807.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-11150725.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-11150626.jpg
http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-11-11150440.jpg


__________________________________________________ __________
the evening of picking up the car there was a 272heroes meet and popped down with some freshly fitted skirts to get a few pics and have a meet up

http://i566.photobucket.com/albums/ss104/Cannon_scooby/6339134466_46fec4a324_b.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/6341004846_3cbee71e77_b.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/6341232824_828a30d788_b.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/DSC03822.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/DSC03789.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/DSC03791.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/DSC03798.jpg

__________________________________________________ __________




ANYWAY LADS AND LADIES!!

hope you like.. feel free to comment ;)

splitter will be on soon by the way

[slimadi]

Looks nice im liking what you have done so far loving that sticker on the visor :rofl the only thing i would do is seal all the bottom looks kinda rusty under there

[Jorge]

I don't know if I like these.... it looks a nice example, and you are getting dug into it well. But still.

[JonnyBoi]

Love it :)
Would love to own one myself!

[Minuki]

Love it! A new hood would finish things off nicely.

[M3NDEREZ]

Never been one for Chrome rims, but still can't help but love this :)

[Cannon]

Never been one for Chrome rims, but still can't help but
love this :)

i **** chrome rims with a passion... but for some reason they just work with this car... usually i would just think chav.. hahaha

Love it! A new hood would finish things off nicely.
yeah thats on the cards.. thinking a black or maybe white cammo one lol

Love it :)
Would love to own one myself!

cheers man.. its a joy to drive

I don't know if I like these.... it looks a nice example, and you are getting dug into it well. But still.

thanks man

i know they arent to everyones taste, but i have fallen in love with it


Looks nice im liking what you have done so far loving that sticker on the visor :rofl the only thing i would do is seal all the bottom looks kinda rusty under there

23 yrs old.. i would say its doing ok has a few little spots but nothing tooo crazy..

[zibomb]

love that FC wheels work so well with it, bet you **** the fuel economy on it !!. A mate of mine has a vert on the floor aswell. Top work...

[SimonF]

Heh, that's Chichester!

Sick RX7 man, loving the work you putting into this. :)

You looked at getting a new hood? Would finish it off so well.

[Cannon]

love that FC wheels work so well with it, bet you **** the fuel economy on it !!. A mate of mine has a vert on the floor aswell. Top work...

thats not ali is it>??

if so we basically have twin rx7s and he even has weds wheels on his now.. lol

Heh, that's Chichester!

Sick RX7 man, loving the work you putting into this. :)

You looked at getting a new hood? Would finish it off so well.


yeah man looked at getting a black one retrimmed onto it..

then thought about maybe a white cammo one.. something different.. and then thought it may ruin the car.. so thinking black.. or blue.. or maybe even... errr... black lol

[Cannon]

bit of an update, doing a shoot and some rolling shots tomorrow.. and the car will be getting a feature on the 272heroes.com blog :) quite chuffed

Looked into prices on new roofs and repairs.. but think it will be happening in the new year now.. unless i sew it up myself with some stretch waterproof stuff and a hook needle and sail repair kit.. ... maybe not

[Anonymoose]

How do you find the coils? Do they go low, spring rates stiff enough?

[Cannon]

How do you find the coils? Do they go low, spring rates stiff enough?

I cannot reccomend the BC coilys enough dude, i have actually raised the car 20mm and even with the front almost solid its SUPER SUPER comfy..

it will be going lower again however now the new zaust is fitted.. and splitter will be on this weekend

roof quotes im still waiting on

and did some rolling shots with a rig a few days ago with a mate, so will put the pics up as soon as i get them - they look IMMENSE!

[JonnyBoi]

More pictures, YAY :D

[Cannon]

sneak peak

http://www.charliefletcher.co.uk/wp-content/uploads/2011/12/Screen-shot-2011-12-05-at-20.07.40.jpg

[Cannon]

here are a few of the rolling shots.. Massive thanks to Charlie Fletcher of Charlie Fletcher Photography

http://www.facebook.com/CharlieFletcherPhotography

Or follow on twatter https://twitter.com/#!/_charliefletch

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/cannons-rx7.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/Cannon-Rear.jpg

[JonnyBoi]

Pfttt who has Twitter, its rubbish :)

And I'm loving the photo's, I want one now :)

[Cannon]

so today I set out to remove the front suspension strut on the drivers side to sort the random camber out,

Squiffy came over to give me a hand as im a noob with suspension and after a little playing and spinning the top mount 180 degree ... its almost identical.. hahahah.. FAIL!

so we decided today was the day to get the s13 pre facelift splitter on..

I went out the back and with the old hot tub cover made a little spray booth...

Primed

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-10112916.jpg

and then Satin Blacked (left over from my old Racing Hart cp035r's, the chequered wheels i had on the 14a)

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-10121856.jpg


the car was already up on the ramp so we got under it, removed the old black splitter/underlining (i genuinely thought it was part of the bumper, didnt realise it was removeable)

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-10132530.jpg


and then lined up the splitter.. unfortunately the drills were all flat.. all 3 of them.. so had to roll the car to the other side of the road to get the extension cord to reach for the b+q 12quid corded drill

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-10150421.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-10150411.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-10154845.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-10154935.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-10154927.jpg

and then got it on using original mounting points and some washers.. so its pretty solid on there,
since taking the pics I have satin blacked the bolts as well - no cable ties used... YET! lol


http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-10160106.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-10162958.jpg

and then it got dark and i couldnt get any good pics - all these were taken with my phone ;)

[Cannon]

Ok so actually got some pics that are a little clearer

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/IMG_0057copybw.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/IMG_0050copybw.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/IMG_0016.jpg

and yes that other car is a datsun and it is running an sr20det and it is awesome... as I know someone will ask me what it is... hahaha - heres a pic


http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/IMG_0017.jpg

[Cannon]

so clutch went, wouldnt let me select any gears when engine running, and pedal is super fluffy, so not a great start to my monday..

but a bit of an update, Bought a new slave and master cylinder as they are both no longer made by mazda and they are useful to have now

AND was towing the car to re:worx and there was a clonk and then it was able to get into 2nd and 3rd, and then slowly the clutch pedal stiffened up, and it was able to select all gears again?????

however didnt want to risk driving it back home so have left it there for now and will speak to them tomorrow to find out what the deal was.. cant hurt for them to have a look anyway

[Cannon]

so update -
got the car back from re:worx all fixed and running great with the new master cylinder and slve cylinder

went to give it a drive after returning from a little run to the shops and thought - hmmm that looks familiar

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-23090141.jpg

so called in on facebook for anyone with silicone hoses and Jim answered the call (with Delilah the sexy datsun)

so moved the stock toyo intercooler out the way and got to work removing the old hose and fitting a sexy SR20det hose onto the coolant connection on the side of the engine block.

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-23115632.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-23115658.jpg

some would say that hose had had it...

so new Samco hose fitted and all boost pipes sorted out and checked - as there were alot of loose jubilee clips for some reason... ???? wierd

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-23115747.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/rexy/2011-12-23115735.jpg

my only issue at the moment is there seems to be a little of a wobble from the front wheel at about 50+ mph i think its from where we have spun the top mount around on the coily to try and sort that camber issue out? I am wondering if spinning it back will stop this?

trying to now source some drive shaft seals as blueprint dont make them I think it is main dealer only - so i can replace them when I fit the welded diff :)

[Cannon]

Few pics from last night after a bit of a cheeky clean and a little more low

http://i566.photobucket.com/albums/ss104/Cannon_scooby/Starting%20out%20with%20550d/IMG_0813.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/Starting%20out%20with%20550d/IMG_0806.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/Starting%20out%20with%20550d/IMG_0796.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/Starting%20out%20with%20550d/IMG_0794.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/Starting%20out%20with%20550d/IMG_0790.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/Starting%20out%20with%20550d/IMG_0789.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/Starting%20out%20with%20550d/IMG_0778.jpg

http://i566.photobucket.com/albums/ss104/Cannon_scooby/Starting%20out%20with%20550d/IMG_0775.jpg