Good tyre shops in Australia

[INDOMI]

I just thought of this, not sure if this would be useful but for me personally good tyre shops are very2 important since having a good stance/fitment requires tyre stretch, good wheel alignment etc.

So if you can, please mention the tyre shop name, which state & suburb, and brief description for example, do they have tyre bead blaster? etc

I'll start

- Tyrepower Hawthorn, VIC - some of the tyre fitters are pretty skillful in stretching tyres, and yes they do have a bead blaster

anyone else wanna contribute?

[Oxer]

I usually fit them myself with a lot of swearing and sweating....

[180roman]

JAXQuickFit Caulfield South

my sole tire supplier and fitter

Has a bead blaster and can stretch tires

Great prices on tires too

[MrRolla]

Baurepairs in westall. Tire stretch np! + across the road from my work :D

[Water Boy]

Trackside Tyres
Factory 2b, 161 Canterbury Rd
Kilsyth Vic 3137
Ph: (03) 9761 5557

Craig will stretch anything. He is a real car bloke and keen on anything...

[Melv]

Bob Jane Melbourne on Elizabeth St CBD.

Speak to Chris who owns 'AHHH' Black S15 and he should be able to fix you up good. Great service and awesome prices. My good mate just got a job there, been fitting tyres for 4 years so stretching is def not a problem at all.

[INDOMI]

thanks for contributing guys, this is some good info especially since most tyres shops around refuse to stretch tyres or even have the skill to do so. For those ppl in other states maybe you can contribute as well, might help fellow members

[private_numero]

bump this thread. any tyre shops in the western suburbs that anyone can recommend? Might need them to adjust my coils to get the camber i need to clear the guards too

[Lukey]

whats a bead blaster?

[x10hz]

bump this thread. any tyre shops in the western suburbs that anyone can recommend? Might need them to adjust my coils to get the camber i need to clear the guards too

tyrepower hawthorne is quite good. And just adjust ur coils urself, it takes like 45mins..

whats a bead blaster?

basically an airtank with a release valve and a nossle thing attached to it, that empties the tank of compressed air when the valve is opened. Pretty sure it generally puts like 20psi into the tyre or something along those lines, then you fill to what ever u want.

[private_numero]

cheers bro. I might have to make the trip to hawthorne to do it. Nothing great in the westside so far haha. Heard nothing but good things from that place. And i would do it myself and just get the shop to fine tune it, but ive never done it before so i dont know how lol. But might get obsrve to help me out if his free!

[Oxer]

Id help you, but I'm leaving for qld on friday :)

[private_numero]

Cheers oxer! How long you gone for? I havent got my wheels yet but i wanna get everything all ready and set out so when they do come in, bang bang bang.

[07BPB]

New guy to the stanceworks forum here. I'm in Brisbane and wonder if anyone knows of any shops around this area who have the know how and willingness to stretch tyres? Cheers.

[Oxer]

Cheers oxer! How long you gone for? I havent got my wheels yet but i wanna get everything all ready and set out so when they do come in, bang bang bang.

Ill be back on thursday.

[LEANBAC]

for the people in the S/E



OTR ( on the run motorsports )

137a westall rd Clayton, VIC

95478100

[Water Boy]

Tyre Power in Resivor are good blokes.

[brybry]

Otr fit tyres?

[private_numero]

Ill be back on thursday.

plenty of time. my set up isnt due for another 4 weeks -.-

[anth]

I get all my tyres from Mag Wheel & Tyre in Preston, awesome blokes, been going there for years.

[goon bag]

good thread, goin to give hawthorn tire power a go this arvo,

[StreekG]

Bob Jane Melbourne on Elizabeth St CBD.

Speak to Chris who owns 'AHHH' Black S15 and he should be able to fix you up good. Great service and awesome prices. My good mate just got a job there, been fitting tyres for 4 years so stretching is def not a problem at all.

I've worked with Chris before, good guy.

Bob Jane Moorabbin just got a bead blaster after way too long
They have some good new fitting and balancing machines too.
Wheel Aligner is top notch there also. Don't know if they would want to do any tyre stretch though. The most i did when i was there was 245 on a 10" rim. I'm no longer in tyres now though.

TTF Moorabbin are a good mob, good prices and service. Nice people too. (One of which is my older bro, lol)

[private_numero]

Not a tyre shop, but any good panel shops that pump guards really good?

[anth]

Speak to Vu at DT Panels in Springvale

[namtaro]

get oxer to do it =P

[Oxer]

get oxer to do it =P

This.

[namtaro]

if i pump guards, first stop oxer's place =P

[private_numero]

Yeah? Ox, might have to take that offer up real soon. Ill be workin 14 days in 2 weeks ffs with 12 hour days. So it'll be sometime after that, and before may 1 ;)

[brybry]

Not a tyre shop, but any good panel shops that pump guards really good?

If you wanta legit roll/pull and reasonably priced, hit up Athid - 0402670354, he's been doing it for years.. and is the Vic motul rep to boot, good dude.

If you need a big pump may be best to goto a panel shop like Vu

[private_numero]

Sweet! thanks for that bry! Think ill shave done the lips 1st, then see how i go then! Cause there aint much of a lip to begin with.

[hakhawk]

so im picking up my lips and centers tomorrow morning, hopefully get them together, and sealed up by the arvo sometime. anyone know any tyre shops thatd be open sunday, or willing to stretch(and balance) some tyres on on sunday for me, in melb.

that, or would they be able to be done saturday arvo, or will the sealant not have cured enough?

who can tell im keen as to get rolling on these wheels?

[180roman]

you should leave the sealant to cure for at least 24 hrs

last thing you want to do is rush it and go too early and then have a leak or something

[hakhawk]

andy at kmart tyre and auto in chadstone was a champ and got my tyres fitted today at 2pm!! good bloke and did me a good price too. highly recommended.

[private_numero]

If you wanta legit roll/pull and reasonably priced, hit up Athid - 0402670354, he's been doing it for years.. and is the Vic motul rep to boot, good dude.

If you need a big pump may be best to goto a panel shop like Vu


I rate athid. Good bloke, knows his shit and did a very clean job on my ride yesterday.

[QIKBRABUS]

I just thought of this, not sure if this would be useful but for me personally good tyre shops are very2 important since having a good stance/fitment requires tyre stretch, good wheel alignment etc.

So if you can, please mention the tyre shop name, which state & suburb, and brief description for example, do they have tyre bead blaster? etc

I'll start

- Tyrepower Hawthorn, VIC - some of the tyre fitters are pretty skillful in stretching tyres, and yes they do have a bead blaster

anyone else wanna contribute?

same here Tyrepower Hawthorn, VIC, i personally think are fantastic they take extra care of your hard earned investments and respect repeat customers. Great place. HIGHLY RECOMMENDED

[mk3]

athid did my chaser, wasent enough though so went and bought my own guard roller and pumped the fuck out of them and they turned out mint.
did it on the aristo my self allso, not so good....had tack welds under the guards and dented the fuck out of the guard while i was rolling it and caused paint crackage......GAY, gonna get vu to fix it up for me.

[mytrex]

i need to find a good tyre shop too. :(
need a total of 10 tyres car car and boat trail FML

[mytrex]

athid did my chaser, wasent enough though so went and bought my own guard roller and pumped the fuck out of them and they turned out mint.
did it on the aristo my self allso, not so good....had tack welds under the guards and dented the fuck out of the guard while i was rolling it and caused paint crackage......GAY, gonna get vu to fix it up for me.

ooo wanna roll my guards for me :)

[Water Boy]

Can anyone recomend a tyre place down the Mornington peninsula?

[shinny]

Got to good places on the inner east.

Bridgestone Richmond off Bridge road. Ask for Stuart. Also owns the one in Rowville. Got planks and gear to get low cars up for alignment n helped with my tyre stretch. Really good guy

Tyre Power Hawthorn. Talk to MIckey they do volks rims and everything there as well. Guys got a Blck r35 gtr n a Amuse 370z!!

[Lukey]

where good place to get nankang in 195/45 from thats open on saturdays

[INDOMI]

^^tyrepower hawthorn is open on saturday

[Lukey]

i think thats where someone off ozhonda works, need to contact them

[The_Giefster]

Any good places in Syd to do stretched tyres?

[J.D]

anyone have a good hook up for tyres?

I'm specifically after some nankang NS2's, in 16" 195/40, and 205/40

[Oxer]

anyone have a good hook up for tyres?

I'm specifically after some nankang NS2's, in 16" 195/40, and 205/40

Me. Any nankangs as long as they are available..

195 only come in 45 profile... $98 each...

205/40/16 $93 each..


Only for SW members ;)

[J.D]

sif 195's only come in 45 profile. full sad sheesh.

I'll talk to ya sunday Ox, but I'm eager beave for some 205/40's. (already got a pair of 195/45's in the shed)